On 10/15/2016 07:10 PM, Max Krummenacher wrote: > Synchronize CONFIG_SPL_PAD_TO (used at build time for u-boot-with-spl.imx) > with > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (used by SPL to read u-boot image). > > Signed-off-by: Max Krummenacher <[email protected]> > --- > > include/configs/imx6_spl.h | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h > index 76d1ca0..0b426bb 100644 > --- a/include/configs/imx6_spl.h > +++ b/include/configs/imx6_spl.h > @@ -23,6 +23,8 @@ > * which consists of a 4K header in front of us that contains the IVT, DCD > * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 > * or 64KB > + * - Padding between start of SPL(with IVT...) and U-Boot is 68KB, SPL > starts > + * at 1KB, U-Boot at 69kB into the storage media. > */ > #define CONFIG_SYS_THUMB_BUILD > #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" > @@ -38,6 +40,7 @@ > /* MMC support */ > #if defined(CONFIG_SPL_MMC_SUPPORT) > #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */ > +#define CONFIG_SPL_PAD_TO 0x11000 /* offset 68KB */
Does this mess up boards which can boot from both SD and other boot media (NAND, SPI NOR, PNOR...) ? > #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */ > #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 > #define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024) > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
