Hi Prabhakar, Thanks for your comments!
> -----Original Message----- > From: Prabhakar Kushwaha > Sent: 2016年10月17日 11:40 > To: Z.Q. Hou <[email protected]>; [email protected]; > [email protected]; york sun <[email protected]>; > [email protected]; [email protected]; [email protected]; > [email protected]; Ruchika Gupta <[email protected]>; > [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; Mingkai Hu <[email protected]> > Cc: Z.Q. Hou <[email protected]> > Subject: RE: [PATCH 2/5] configs/ls104xa: enable the config NOR_BOOT > > > > -----Original Message----- > > From: Zhiqiang Hou [mailto:[email protected]] > > Sent: Wednesday, October 12, 2016 2:56 PM > > To: [email protected]; [email protected]; york sun > > <[email protected]>; [email protected]; [email protected]; > [email protected]; > > [email protected]; Ruchika Gupta > <[email protected]>; > > [email protected]; [email protected]; Prabhakar Kushwaha > > <[email protected]>; [email protected]; [email protected]; > > [email protected]; [email protected]; [email protected]; > > Mingkai Hu <[email protected]> > > Cc: Z.Q. Hou <[email protected]> > > Subject: [PATCH 2/5] configs/ls104xa: enable the config NOR_BOOT > > > > From: Hou Zhiqiang <[email protected]> > > > > Enable the config NOR_BOOT obviously for NOR boot defconfigs of > > ls1043a and ls1046a. > > > > Earlier, no CONFIG for NOR boot was required. > Why new variable CONFIG_NOR_BOOT is even required? Now that the Boot Media configs has been introduced, it's reasonable to uniform all boot methods under this framework. And therefore the other config entry is able to be configured according to different Boot Media. Thanks, Zhiqiang _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
