On Fri, Oct 14, 2016 at 4:58 AM, Stephen Arnold
<stephen.arnol...@gmail.com> wrote:
> Okay, rebased on u-boot master again and updated the config for
> i2c/spl.  I have an RFC patch for u-boot and an updated kernel dts to
> test; I also brought in the (small) sun7i-a20.dtsi patch to add the
> standard A20 i2c4 pins_a which is the only i2c brought out on the Pi
> header (goes with pin fix for uart3).
>
> Since this is not quite what I'm running now, and I had to go back and
> trace some wiring on the schematic for USB, I think I've got it dialed
> in now, so I'll test it when my kernel is finished.
>
> If that looks good, I'll make a kernel patch and try that list for a change...

OK, please send.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to