On 10/14/2016 03:45 AM, Robert Ianovich wrote: > I have a iMX233 with SD as storage and I need to have first partition > fat32, otherways windows will not open the SD card at all. Customer needs > to get/save some data from windows. > > So what I did is wrote U-Boot on 2'nd and rootfs on 3'rd. > > Command (m for help): p > Disk /dev/sdb: 7,4 GiB, 7969177600 bytes, 15564800 sectors > Units: sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disklabel type: dos > Disk identifier: 0x763f9f2e > > Device Boot Start End Sectors Size Id Type > /dev/sdb1 2048 8390655 8388608 4G c W95 FAT32 (LBA) > /dev/sdb2 * 8390656 8521727 131072 64M 53 OnTrack DM6 Aux3 > /dev/sdb3 8521728 15564799 7043072 3,4G 83 Linux > > U-Boot starts just fine but cannot boot from 3'rd. > > There is a solution for this, do I need to recompile U-Boot.
Do you want to use the 3rd partition as rootfs? Does it jump to kernel? Best Regards, Jaehoon Chung > > If so, where should I modify. > > Thanks very much in advance, > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot