Hi,
On Tue, Oct 18, 2016 at 04:36:54PM +0000, Diego Dorta wrote:
> Hi all,
>
> According to commit log:
>
> commit 431889d6ad9a39846636716478d504aa7ff976fc
> Author: Ladislav Michl <la...@linux-mips.org>
> Date: Tue Jul 12 20:28:14 2016 +0200
>
> spl: zImage support in Falcon mode
>
> Other payload than uImage is currently considered to be raw U-Boot
> image. Check also for zImage in Falcon mode.
>
> Signed-off-by: Ladislav Michl <la...@linux-mips.org>
> Reviewed-by: Heiko Schocher <h...@denx.de>
>
> Already include at U-Boot 2016.09.01.
>
> I was trying to apply Falcon mode on i.MX6 Sabre SD using zImage instead of
> uImage.
> After the steps below I got an error trying to "spl export":
>
> # dhcp ${fdt_addr} imx6q-sabresd.dtb
>
> # dhcp ${loadaddr} zImage
>
> # mmc write ${loadaddr} 0x1000 0x4000
Where did you get those numbers above?
> # setenv bootargs 'console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4
> rootwait quiet rw'
>
> # spl export fdt ${loadaddr} - ${fdt_addr}
[garbage deleted]
> ERROR: can't get kernel image!
> XIP Invalid Image ... OK
> ERROR: booting os 'Invalid OS' (0) is not supported
> ERROR: booting os 'Invalid OS' (0) is not supported
> ERROR: booting os 'Invalid OS' (0) is not supported
> ERROR prep subcommand failed!
> Subcommand failed
>
> I can't understand this error. Does anybody know how to fix it?
Does it work with uImage? Also patch you pointed at above has nothing to
do with u-boot itself, but SPL which does not seem to get involved.
> Regards,
> Diego
Best regards,
ladis
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
