Hi Simon,
On 11/12/2016 12:17 AM, Simon Glass wrote:
Hi Kever,
On 9 November 2016 at 00:30, Kever Yang <[email protected]> wrote:
Enable the usb host port 5V power by enable the fix regulator.
The PopMetal board have a on board FE1.1 usb 2.0 hub which connect to
the usb host port, we need to de-assert its reset pin at the same time.
This should go in a USB driver.
This patch 1)enable the 5V vbus power and 2)de-assert the hub reset pin,
1) may go to USB driver, but 2) still need to be in board init because
that is
totally board specific.
Thanks,
- Kever
Signed-off-by: Kever Yang <[email protected]>
---
board/chipspark/popmetal_rk3288/popmetal-rk3288.c | 31 +++++++++++++++++++++++
1 file changed, 31 insertions(+)
Regards,
Simon
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
