Stefan
> From: Stefan Agner <[email protected]>
>This patchset cleans up the SPL USB Gadget Kconfig and Makfile.
>The first two patches are actual fixes and we might consider to add these two
>for the v2016.11 release. The third one adds a new config option for cleaner
>structure. I plan to add another USB function with SPL support which is the
>reason I looked into this...
>Build tested using buildman for all boards on powerpc mips and arm. No new
>errors or warnings:
>Building 4 commits for 1072 boards (8 threads, 1 job per thread)
>4044 0 244 /4288 P1022DS_NAND
>This patchset is probably most interesting for am335x_evm_usbspl_defconfig
>(CONFIG_SPL_USBETH_SUPPORT) And the board with which SPL DFU support has been
>introduced dra7xx_evm_defconfig (CONFIG_SPL_DFU_SUPPORT, not set by default)
>Due to lack of any of this hardware I did not run the binaries!
>Since it is mostly Makefile shuffling I don't expect any runtime behavior
>changes... If anyone (maybe Ravi or Lukasz, afaik you worked on the SPL DFU
>support for dra7xx_evm) could test the patchset on actual hardware I would be
>glad!
Sure, I will test SPL-DFU with this patches on dra7xx platform.
But I see SPL-DFU does not compile (dra7xx_evm_defconfig) in current mainline.
Due to other patches came in, and also SPL-DFU disabled, I agree reason to
reduce spl image size limit ("usb:gadget: Disallow DFU in SPL for now"
commit:6ad6a10), need to compile out dfu gadget when SPL-DFU not selected.
First I will fix the spl-dfu compile issue and then will test this patch series.
Regards
Ravi
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
