The Allwinner A64 SoC starts execution in AArch32 mode, and both
the boot ROM and Allwinner's boot0 keep running in this mode.
So U-Boot gets entered in 32-bit, although we want it to run in AArch64.
By using a "magic" instruction, which happens to be an almost-NOP in
AArch64 and a branch in AArch32, we differentiate between being
entered in 64-bit or 32-bit mode.
If in 64-bit mode, we proceed with the branch to reset, but in 32-bit
mode we trigger an RMR write to bring the core into AArch64/EL3 and
re-enter U-Boot at CONFIG_SYS_TEXT_BASE.
This allows a 64-bit U-Boot to be both entered in 32 and 64-bit mode,
so we can use the same start code for the SPL and the U-Boot proper.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
arch/arm/include/asm/arch-sunxi/boot0.h | 27 +++++++++++++++++++++++++++
board/sunxi/Kconfig | 5 +++++
2 files changed, 32 insertions(+)
diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h
b/arch/arm/include/asm/arch-sunxi/boot0.h
index 6a13db5..c31a2af 100644
--- a/arch/arm/include/asm/arch-sunxi/boot0.h
+++ b/arch/arm/include/asm/arch-sunxi/boot0.h
@@ -4,6 +4,33 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER)
/* reserve space for BOOT0 header information */
b reset
.space 1532
+#elif defined(CONFIG_ARM_BOOT_HOOK_RMR)
+/* switch into AArch64 if needed */
+ tst x0, x0 // this is "b #0x84" in ARM
+ b reset
+ .space 0x7c
+ .word 0xe3a01617 // mov r1, #0x1700000
+ .word 0xe38110a0 // orr r1, r1, #0xa0
+ .word 0xe59f0020 // ldr r0, [pc, #32]
+ .word 0xe5810000 // str r0, [r1]
+ .word 0xf57ff04f // dsb sy
+ .word 0xf57ff06f // isb sy
+ .word 0xee1c0f50 // mrc 15, 0, r0, cr12, cr0, {2}
+ .word 0xe3800003 // orr r0, r0, #3
+ .word 0xee0c0f50 // mcr 15, 0, r0, cr12, cr0, {2}
+ .word 0xf57ff06f // isb sy
+ .word 0xe320f003 // wfi
+ .word 0xeafffffd // b @wfi
+#ifdef CONFIG_SPL_BUILD
+ .word CONFIG_SPL_TEXT_BASE
+#else
+ .word CONFIG_SYS_TEXT_BASE
+#endif
+#else
+/* normal execution */
+ b reset
+#endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 0cd57a2..ba72e76 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -142,6 +142,11 @@ config RESERVE_ALLWINNER_BOOT0_HEADER
blob relies on this information to load and execute U-Boot.
Only needed on 64-bit Allwinner boards so far when using boot0.
+config ARM_BOOT_HOOK_RMR
+ bool
+ default y if ARM64
+ select ENABLE_ARM_SOC_BOOT0_HOOK
+
config DRAM_TYPE
int "sunxi dram type"
depends on MACH_SUN8I_A83T
--
2.8.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
