To enable secure boot, we need to jump back into the BootROM to continue the SoC's boot process instead of letting the SPL load and run the main U-Boot image.
But, since the u-boot-spl.img (including the 64 byte header) is loaded by the SoC as the main image, we need to compensate for the header length to get a correct entry point. Thus, we subtract the header size from the destination address, so that the execution address points at the actual entry point of the image. Other boards ignore both parameters anyway, so this change shouldn't concern them. Signed-off-by: Mario Six <[email protected]> --- tools/kwbimage.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 369aba7..0659296 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -384,7 +384,8 @@ static void *image_create_v1(size_t *imagesz, struct image_tool_params *params, cpu_to_le32(payloadsz - headersz + sizeof(uint32_t)); main_hdr->headersz_lsb = cpu_to_le16(headersz & 0xFFFF); main_hdr->headersz_msb = (headersz & 0xFFFF0000) >> 16; - main_hdr->destaddr = cpu_to_le32(params->addr); + main_hdr->destaddr = cpu_to_le32(params->addr) + - sizeof(image_header_t); main_hdr->execaddr = cpu_to_le32(params->ep); main_hdr->srcaddr = cpu_to_le32(headersz); main_hdr->ext = hasext; -- 2.9.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
