Use TARGET_P1020RDB_PD instead of sharing with P1_P2_RDB_PC to simplify Kconfig and config macros.
Remove macro CONFIG_P1020RDB_PD. Signed-off-by: York Sun <[email protected]> --- arch/powerpc/cpu/mpc85xx/Kconfig | 5 +++++ board/freescale/p1_p2_rdb_pc/Kconfig | 3 ++- board/freescale/p1_p2_rdb_pc/ddr.c | 2 +- board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 4 ++-- board/freescale/p1_p2_rdb_pc/tlb.c | 2 +- configs/P1020RDB-PD_NAND_defconfig | 4 ++-- configs/P1020RDB-PD_SDCARD_defconfig | 4 ++-- configs/P1020RDB-PD_SPIFLASH_defconfig | 4 ++-- configs/P1020RDB-PD_defconfig | 3 +-- include/configs/p1_p2_rdb_pc.h | 12 ++++++------ scripts/config_whitelist.txt | 1 - 11 files changed, 24 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index d7b3763..d7414e2 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -125,6 +125,11 @@ config TARGET_P1020RDB_PC select SUPPORT_SPL select SUPPORT_TPL +config TARGET_P1020RDB_PD + bool "Support P1020RDB-PD" + select SUPPORT_SPL + select SUPPORT_TPL + config TARGET_P1_P2_RDB_PC bool "Support p1_p2_rdb_pc" diff --git a/board/freescale/p1_p2_rdb_pc/Kconfig b/board/freescale/p1_p2_rdb_pc/Kconfig index 6fa6859..c46e04e 100644 --- a/board/freescale/p1_p2_rdb_pc/Kconfig +++ b/board/freescale/p1_p2_rdb_pc/Kconfig @@ -1,6 +1,7 @@ if TARGET_P1_P2_RDB_PC || \ TARGET_P1020MBG || \ - TARGET_P1020RDB_PC + TARGET_P1020RDB_PC || \ + TARGET_P1020RDB_PD config SYS_BOARD default "p1_p2_rdb_pc" diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index 2abe840..8291c18 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -78,7 +78,7 @@ dimm_params_t ddr_raw_timing = { .refresh_rate_ps = 7800000, .tfaw_ps = 30000, }; -#elif (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD)) +#elif (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) /* Micron MT41J512M8_187E */ dimm_params_t ddr_raw_timing = { .n_ranks = 2, diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 1a8744e..33f2c7e 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -428,7 +428,7 @@ int ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; phys_size_t size; -#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC) +#if defined(CONFIG_TARGET_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC) const char *soc_usb_compat = "fsl-usb2-dr"; int usb_err, usb1_off, usb2_off; #endif @@ -478,7 +478,7 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif -#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC) +#if defined(CONFIG_TARGET_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC) /* Delete USB2 node as it is muxed with eLBC */ usb1_off = fdt_node_offset_by_compatible(blob, -1, soc_usb_compat); diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index d88c06f..7cba411 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -85,7 +85,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_1G, 1), -#if defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD) +#if defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD) /* 2G DDR on P1020MBG, map the second 1G */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index f2d8fe2..86cf952 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -2,12 +2,12 @@ CONFIG_PPC=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,NAND" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_TPL=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 80516e0..7131bce 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -6,12 +6,12 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SDCARD" +CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index 6ac21e7..3bc9afd 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -7,12 +7,12 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SPIFLASH" +CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index ecb2272..1cae066 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -1,11 +1,10 @@ CONFIG_PPC=y CONFIG_MPC85xx=y -CONFIG_TARGET_P1_P2_RDB_PC=y +CONFIG_TARGET_P1020RDB_PD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD" CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index edb5395..010a9ed 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -58,7 +58,7 @@ * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off */ -#if defined(CONFIG_P1020RDB_PD) +#if defined(CONFIG_TARGET_P1020RDB_PD) #define CONFIG_BOARDNAME "P1020RDB-PD" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 @@ -336,7 +336,7 @@ #define SPD_EEPROM_ADDRESS 0x52 #undef CONFIG_FSL_DDR_INTERACTIVE -#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD)) +#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G #define CONFIG_CHIP_SELECTS_PER_CTRL 2 #else @@ -406,7 +406,7 @@ /* * Local Bus Definitions */ -#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD)) +#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)) #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ #define CONFIG_SYS_FLASH_BASE 0xec000000 #elif defined(CONFIG_P1020UTM) @@ -455,7 +455,7 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_CMD_NAND -#if defined(CONFIG_P1020RDB_PD) +#if defined(CONFIG_TARGET_P1020RDB_PD) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) #else #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) @@ -466,7 +466,7 @@ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#if defined(CONFIG_P1020RDB_PD) +#if defined(CONFIG_TARGET_P1020RDB_PD) #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ | OR_FCM_PGS /* Large Page*/ \ | OR_FCM_CSCT \ @@ -853,7 +853,7 @@ #endif #endif -#if defined(CONFIG_P1020RDB_PD) +#if defined(CONFIG_TARGET_P1020RDB_PD) #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 81118af..6d7b5ff 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -3384,7 +3384,6 @@ CONFIG_OS_ENV_ADDR CONFIG_OTHBOOTARGS CONFIG_OVERWRITE_ETHADDR_ONCE CONFIG_P1020 -CONFIG_P1020RDB_PD CONFIG_P1020UTM CONFIG_P1021 CONFIG_P1021RDB -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
