On Fri, Nov 25, 2016 at 10:07 PM, Champ, Andy <[email protected]> wrote: > Hi all, > > > in the table in drivers/mtd/spi/spi_flash_ids.c there is a flag WR_QPP set > against Macronix devices (including the ones Dumitru is just adding). > > > This is used when programming the devices on a 4-bit bus to select the > command to use for programming - either CMD_QUAD_PAGE_PROGRAM (0x32) or > CMD_PAGE_PROGRAM (0x2). > > > The Macronix devices that I have a spec for do not mention command 0x32. Each > of the devices that I have a spec for ( MX25L25635F MX25U51245G MX25V8035F > and MX25V1635F ) use command 0x38 instead.
We need to fix this, till now no Macronix has been tested with QUAD I think, please send the suitable fix will review. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
