On Fri, Nov 25, 2016 at 8:08 PM, Phil Edworthy <phil.edwor...@renesas.com> wrote: > This series has fixes, patches to clean the code up, and add support for > specifying the sampling edge. > > Changed in v2: > spi: cadence_qspi: Fix baud rate calculation > spi: cadence_qspi: Fix CS timings (was "Fix CQSPI_CAL_DELAY calculation") > spi: cadence_qspi: Support specifying the sample edge used > > Added in v2: > spi: cadence_qspi: Better debug information on the SPI clock rate > > Phil Edworthy (8): > spi: cadence_qspi: Fix clearing of pol/pha bits > spi: cadence_qspi: Fix baud rate calculation
Please fix the comment for this patch. > spi: cadence_qspi: Better debug information on the SPI clock rate > spi: cadence_qspi: Use #define for bits instead of bit shifts And this one, > spi: cadence_qspi: Clean up the #define names > spi: cadence_qspi: Remove returns from end of void functions > spi: cadence_qspi: Fix CS timings > spi: cadence_qspi: Support specifying the sample edge used All look OK, expect above two. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
