On Wed, Nov 30, 2016 at 03:02:53PM +0530, Keerthy wrote:

> The GPIO7 pad mux should be programmed to POWERHOLD value
> as per board design. In cases where the PMIC is shut off the
> mux is set to GPIO7 mode. So during initialization to be on the
> safer side set the mode to POWERHOLD.
> Signed-off-by: Keerthy <j-keer...@ti.com>

Reviewed-by: Tom Rini <tr...@konsulko.com>


Attachment: signature.asc
Description: Digital signature

U-Boot mailing list

Reply via email to