Hi,

On 11/24/2016 11:10 AM, Michael Kurz wrote:
> This patch adds glue code required for enabling the designware
> mac on stm32f7 devices.

ethernet is not working at my end, is it working at your end.

> 
> Signed-off-by: Michael Kurz <michi.k...@gmail.com>
> Acked-by: Joe Hershberger <joe.hershber...@ni.com>
> 
> ---
> 
> Changes in v3:
> - Add Acked-by tag to 'add designware mac glue code for stm32'
> 
> Changes in v2:
> - Replaced bit shifts and masks with BIT() and GENMASK() macro
> - Moved STM32_SYSCFG_BASE into stm32.h header
> 
>  arch/arm/include/asm/arch-stm32f7/stm32_periph.h |  1 +
>  arch/arm/include/asm/arch-stm32f7/syscfg.h       | 38 ++++++++++++++++
>  arch/arm/mach-stm32/stm32f7/clock.c              |  5 +++
>  board/st/stm32f746-disco/stm32f746-disco.c       | 56 
> ++++++++++++++++++++++++
>  configs/stm32f746-disco_defconfig                | 15 ++++++-
>  drivers/net/designware.c                         |  1 +
>  include/configs/stm32f746-disco.h                |  9 +++-
>  7 files changed, 122 insertions(+), 3 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-stm32f7/syscfg.h
> 

[...]

> +CONFIG_NETCONSOLE=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +# CONFIG_SPL_SERIAL_PRESENT is not set
> +CONFIG_OF_LIBFDT_OVERLAY=y
>  # CONFIG_EFI_LOADER is not set
> diff --git a/drivers/net/designware.c b/drivers/net/designware.c
> index 9e6d726..883ca5a 100644
> --- a/drivers/net/designware.c
> +++ b/drivers/net/designware.c
> @@ -738,6 +738,7 @@ static const struct udevice_id designware_eth_ids[] = {
>         { .compatible = "allwinner,sun7i-a20-gmac" },
>         { .compatible = "altr,socfpga-stmmac" },
>         { .compatible = "amlogic,meson6-dwmac" },
> +       { .compatible = "st,stm32-dwmac" },

adding compatible for the soc in the peripheral driver ?
why not to use the existing one in the stm32 dts file. I see others (allwinner, 
altr ) have also done the same which is unnecesary & not as per binding.
please replace compatible string with one mentioned in binding doc(something 
like "snps, dwmac") in the driver as well the dts of stm32, allwinner, altr etc.


Cheers,
Vikas

>         { }
>  };
> 
> diff --git a/include/configs/stm32f746-disco.h 
> b/include/configs/stm32f746-disco.h
> index 4391bff..4088064 100644
> --- a/include/configs/stm32f746-disco.h
> +++ b/include/configs/stm32f746-disco.h
> @@ -42,6 +42,11 @@
>  #define CONFIG_STM32_FLASH
>  #define CONFIG_STM32X7_SERIAL
> 
> +#define CONFIG_DESIGNWARE_ETH
> +#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL (8)
> +#define CONFIG_DW_ALTDESCRIPTOR
> +#define CONFIG_MII
> +
>  #define CONFIG_STM32_HSE_HZ            25000000
>  #define CONFIG_SYS_CLK_FREQ            200000000 /* 200 MHz */
>  #define CONFIG_SYS_HZ_CLOCK            1000000 /* Timer is clocked at 1MHz */
> @@ -56,8 +61,8 @@
>                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
> 
>  #define CONFIG_SYS_MAXARGS             16
> -#define CONFIG_SYS_MALLOC_LEN          (16 * 1024)
> -#define CONFIG_STACKSIZE               (64 << 10)
> +#define CONFIG_SYS_MALLOC_LEN          (1 * 1024 * 1024)
> +#define CONFIG_STACKSIZE               (256 * 1024)
> 
>  #define CONFIG_BAUDRATE                        115200
>  #define CONFIG_BOOTARGS                                                      
>   \
> --
> 2.1.4
> 
> .
> 
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to