diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 993485a..2427285 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -399,6 +399,7 @@ config TARGET_BCMNSP
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select DM
+ select DM_I2C
select DM_SPI_FLASH
select DM_SERIAL
select DM_SPI
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index 77d0a4e..203136f 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -101,6 +101,7 @@ void set_board_info(void)
#ifdef CONFIG_LCD_MENU
static int power_key_pressed(u32 reg)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
struct pmic *pmic;
u32 status;
u32 mask;
@@ -123,6 +124,9 @@ static int power_key_pressed(u32 reg)
return 0;
return !!(status & mask);
+#else
+ return 0;
+#endif
}
static int key_pressed(int key)
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 66a54d4..7200c2e 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -53,6 +53,7 @@ int exynos_init(void)
void i2c_init_board(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int err;
/* I2C_5 -> PMIC */
@@ -67,8 +68,10 @@ void i2c_init_board(void)
gpio_request(EXYNOS4_GPIO_Y41, "i2c_data");
gpio_direction_output(EXYNOS4_GPIO_Y40, 1);
gpio_direction_output(EXYNOS4_GPIO_Y41, 1);
+#endif
}
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
static void trats_low_power_mode(void)
{
struct exynos4_clock *clk =
@@ -273,11 +276,14 @@ static int pmic_init_max8997(void)
puts("MAX8997 PMIC setting error!\n");
return -1;
}
+
return 0;
}
+#endif
int exynos_power_init(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int chrg, ret;
struct power_battery *pb;
struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
@@ -341,6 +347,7 @@ int exynos_power_init(void)
if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
puts("CHARGE Battery !\n");
+#endif
return 0;
}
@@ -384,6 +391,7 @@ static void check_hw_revision(void)
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret = 0;
u32 val = 0;
struct pmic *p = pmic_get("MAX8997_PMIC");
@@ -415,6 +423,7 @@ static int s5pc210_phy_control(int on)
puts("MAX8997 LDO setting error!\n");
return -1;
}
+#endif
return 0;
}
@@ -435,11 +444,16 @@ int board_usb_init(int index, enum usb_init_type init)
int g_dnl_board_usb_cable_connected(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
struct pmic *muic = pmic_get("MAX8997_MUIC");
if (!muic)
return 0;
return !!muic->chrg->chrg_type(muic);
+#else
+ return false;
+#endif
+
}
#endif
@@ -552,6 +566,7 @@ void exynos_reset_lcd(void)
int lcd_power(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret = 0;
struct pmic *p = pmic_get("MAX8997_PMIC");
if (!p)
@@ -569,12 +584,13 @@ int lcd_power(void)
puts("MAX8997 LDO setting error!\n");
return -1;
}
-
+#endif
return 0;
}
int mipi_power(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret = 0;
struct pmic *p = pmic_get("MAX8997_PMIC");
if (!p)
@@ -592,7 +608,7 @@ int mipi_power(void)
puts("MAX8997 LDO setting error!\n");
return -1;
}
-
+#endif
return 0;
}
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index 7b28ae8..150503e 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -151,8 +151,6 @@ int exynos_early_init_f(void)
return 0;
}
-static int pmic_init_max77686(void);
-
int exynos_init(void)
{
struct exynos4_power *pwr =
@@ -176,6 +174,7 @@ int exynos_init(void)
int exynos_power_init(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int chrg;
struct power_battery *pb;
struct pmic *p_chrg, *p_muic, *p_fg, *p_bat;
@@ -236,13 +235,14 @@ int exynos_power_init(void)
if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
puts("CHARGE Battery !\n");
-
+#endif
return 0;
}
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret = 0;
unsigned int val;
struct pmic *p, *p_pmic, *p_muic;
@@ -299,7 +299,7 @@ static int s5pc210_phy_control(int on)
if (ret)
return -1;
-
+#endif
return 0;
}
@@ -319,14 +319,19 @@ int board_usb_init(int index, enum usb_init_type init)
int g_dnl_board_usb_cable_connected(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
struct pmic *muic = pmic_get("MAX77693_MUIC");
if (!muic)
return 0;
return !!muic->chrg->chrg_type(muic);
+#else
+ return false;
+#endif
}
#endif
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
static int pmic_init_max77686(void)
{
struct pmic *p = pmic_get("MAX77686_PMIC");
@@ -379,6 +384,7 @@ static int pmic_init_max77686(void)
return 0;
}
+#endif
/*
* LCD
@@ -387,18 +393,21 @@ static int pmic_init_max77686(void)
#ifdef CONFIG_LCD
int mipi_power(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
struct pmic *p = pmic_get("MAX77686_PMIC");
/* LDO8 VMIPI_1.0V_AP */
max77686_set_ldo_mode(p, 8, OPMODE_ON);
/* LDO10 VMIPI_1.8V_AP */
max77686_set_ldo_mode(p, 10, OPMODE_ON);
+#endif
return 0;
}
void exynos_lcd_power_on(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
struct pmic *p = pmic_get("MAX77686_PMIC");
/* LCD_2.2V_EN: GPC0[1] */
@@ -410,6 +419,7 @@ void exynos_lcd_power_on(void)
pmic_probe(p);
max77686_set_ldo_voltage(p, 25, 3100000);
max77686_set_ldo_mode(p, 25, OPMODE_LPM);
+#endif
}
void exynos_reset_lcd(void)
diff --git a/board/samsung/universal_c210/universal.c
b/board/samsung/universal_c210/universal.c
index 81e35b6..c3946ee 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -38,10 +38,9 @@ static int get_hwrev(void)
return board_rev & 0xFF;
}
-static void init_pmic_lcd(void);
-
int exynos_power_init(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret;
/*
@@ -53,7 +52,7 @@ int exynos_power_init(void)
return ret;
init_pmic_lcd();
-
+#endif
return 0;
}
@@ -84,6 +83,7 @@ static unsigned short get_adc_value(int channel)
static int adc_power_control(int on)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret;
struct pmic *p = pmic_get("MAX8998_PMIC");
if (!p)
@@ -97,6 +97,9 @@ static int adc_power_control(int on)
MAX8998_LDO4, !!on);
return ret;
+#else
+ return 0;
+#endif
}
static unsigned int get_hw_revision(void)
@@ -144,6 +147,7 @@ static void check_hw_revision(void)
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
int ret = 0;
struct pmic *p = pmic_get("MAX8998_PMIC");
if (!p)
@@ -175,7 +179,7 @@ static int s5pc210_phy_control(int on)
puts("MAX8998 LDO setting error!\n");
return -1;
}
-
+#endif
return 0;
}
@@ -201,6 +205,7 @@ int exynos_early_init_f(void)
return 0;
}
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
static void init_pmic_lcd(void)
{
unsigned char val;
@@ -248,6 +253,7 @@ static void init_pmic_lcd(void)
if (ret)
puts("LCD pmic initialisation error!\n");
}
+#endif
void exynos_cfg_lcd_gpio(void)
{
@@ -304,6 +310,7 @@ void exynos_reset_lcd(void)
void exynos_lcd_power_on(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
struct pmic *p = pmic_get("MAX8998_PMIC");
if (!p)
@@ -314,6 +321,7 @@ void exynos_lcd_power_on(void)
pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON);
pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON);
+#endif
}
void exynos_cfg_ldo(void)
@@ -328,8 +336,9 @@ void exynos_enable_ldo(unsigned int onoff)
int exynos_init(void)
{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
char buf[16];
-
+#endif
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
switch (get_hwrev()) {
@@ -354,13 +363,14 @@ int exynos_init(void)
break;
}
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
/* Request soft I2C gpios */
strcpy(buf, "soft_i2c_scl");
gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, buf);
strcpy(buf, "soft_i2c_sda");
gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, buf);
-
+#endif
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
diff --git a/configs/origen_defconfig b/configs/origen_defconfig
index 0d91ec1..7b9826a 100644
--- a/configs/origen_defconfig
+++ b/configs/origen_defconfig
@@ -37,3 +37,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Samsung"
CONFIG_G_DNL_VENDOR_NUM=0x04e8
CONFIG_G_DNL_PRODUCT_NUM=0x6601
+CONFIG_DM_I2C=y
diff --git a/include/configs/s5pc210_universal.h
b/include/configs/s5pc210_universal.h
index 0210c5b..1bfefe9 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -153,25 +153,6 @@
#define CONFIG_SAMSUNG_ONENAND
#define CONFIG_SYS_ONENAND_BASE 0x0C000000
-#include <asm/arch/gpio.h>
-/*
- * I2C Settings
- */
-#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
-#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 7
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8998
-
#define CONFIG_USB_GADGET_DWC2_OTG_PHY
/*
diff --git a/include/configs/trats.h b/include/configs/trats.h
index a26d663..a771ddb 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -178,36 +178,6 @@
/* GPT */
#define CONFIG_RANDOM_UUID
-/* I2C */
-#include <asm/arch/gpio.h>
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0xFE
-#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_SYS_I2C_INIT_BOARD
-
-/* I2C FG */
-#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_Y41
-#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_Y40
-
-/* POWER */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8997
-
-#define CONFIG_POWER_FG
-#define CONFIG_POWER_FG_MAX17042
-#define CONFIG_POWER_MUIC
-#define CONFIG_POWER_MUIC_MAX8997
-#define CONFIG_POWER_BATTERY
-#define CONFIG_POWER_BATTERY_TRATS
-
/* Security subsystem - enable hw_rand() */
#define CONFIG_EXYNOS_ACE_SHA
#define CONFIG_LIB_HW_RAND
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 1633c67..1cd3e14 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -155,39 +155,6 @@
/* GPT */
#define CONFIG_RANDOM_UUID
-/* I2C */
-#include <asm/arch/gpio.h>
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
-#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_SOFT
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
-#define I2C_SOFT_DECLARATIONS2
-#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_SYS_I2C_INIT_BOARD
-
-#ifndef __ASSEMBLY__
-int get_soft_i2c_scl_pin(void);
-int get_soft_i2c_sda_pin(void);
-#endif
-#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin()
-#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin()
-
-/* POWER */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX77686
-#define CONFIG_POWER_PMIC_MAX77693
-#define CONFIG_POWER_MUIC_MAX77693
-#define CONFIG_POWER_FG_MAX77693
-#define CONFIG_POWER_BATTERY_TRATS2
-
/* Security subsystem - enable hw_rand() */
#define CONFIG_EXYNOS_ACE_SHA
#define CONFIG_LIB_HW_RAND
