Stop booting legacy uImage and now boot zImage.

Signed-off-by: Fabien Parent <[email protected]>
---

v1 .. v2

        * Used __stringify(CONFIG_BOOTFILE) to avoid code duplication

---
 configs/omapl138_lcdk_defconfig | 1 +
 include/configs/omapl138_lcdk.h | 9 +++++----
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index 52681c92d0..d030ffafc3 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -13,6 +13,7 @@ CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot > "
+CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 7c2f4141c9..ea28db2f59 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -247,7 +247,7 @@
  */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOOTFILE                "uImage" /* Boot file name */
+#define CONFIG_BOOTFILE                "zImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16 /* max number of command args */
@@ -276,19 +276,20 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "fdtaddr=0xc0600000\0" \
        "fdtfile=da850-lcdk.dtb\0" \
-       "fdtboot=bootm 0xc0700000 - ${fdtaddr};\0" \
+       "fdtboot=bootz 0xc0700000 - ${fdtaddr};\0" \
        "mmcboot=" \
                "if fatload mmc 0 0xc0600000 boot.scr; then " \
                        "source 0xc0600000; " \
                "else " \
-                       "fatload mmc 0 0xc0700000 uImage; " \
+                       "fatload mmc 0 0xc0700000 " \
+                               __stringify(CONFIG_BOOTFILE) "; " \
                        "fatload mmc 0 ${fdtaddr} ${fdtfile}; " \
                        "run fdtboot; " \
                "fi;\0" \
        "spiboot=" \
                "sf probe 0; " \
                "sf read 0xc0700000 0x80000 0x220000; " \
-               "bootm 0xc0700000;\0"
+               "bootz 0xc0700000;\0"
 
 /*
  * U-Boot commands
-- 
2.11.0

_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to