From: Konstantin Porotchkin <kos...@marvell.com>
Align the Armada-8040-db and Armada-7040-db SPI and I2C
DTS settings with latest DB settings:
- 8040-db: disable i2c0 and spi0 on AP (MPPs are reserved for SDIO)
- 8040-db: disable cps_i2c0 on CP1
- 8040-db: enable spi1 on CP1 (the new location of the boot flash)
The spi1 on CP1 is aliased as spi0 since this is the way
the driver enumerates it.
Signed-off-by: Konstantin Porotchkin <kos...@marvell.com>
Reviewed-by: Stefan Roese <s...@denx.de>
Cc: Stefan Roese <s...@denx.de>
Cc: Nadav Haklai <nad...@marvell.com>
Cc: Neta Zur Hershkovits <n...@marvell.com>
Cc: Omri Itach <om...@marvell.com>
Cc: Igal Liberman <ig...@marvell.com>
Cc: Haim Boot <ha...@marvell.com>
Cc: Hanna Hawa <han...@marvell.com>
---
Changes for v3:
- Move patch change log to comments section
arch/arm/dts/armada-7040-db.dts | 32 ----------------------
arch/arm/dts/armada-8040-db.dts | 60 +++++++++++++++++------------------------
2 files changed, 25 insertions(+), 67 deletions(-)
diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index b8fe5a9..1e4d676 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -66,38 +66,6 @@
};
};
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&spi0 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
- };
- };
- };
-};
-
&uart0 {
status = "okay";
};
diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index 7fb674b..86666a1 100644
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -57,7 +57,7 @@
aliases {
i2c0 = &cpm_i2c0;
- spi0 = &spi0;
+ spi0 = &cps_spi1;
};
memory@00000000 {
@@ -66,38 +66,6 @@
};
};
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&spi0 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x200000>;
- };
- partition@400000 {
- label = "Filesystem";
- reg = <0x200000 0xce0000>;
- };
- };
- };
-};
-
/* Accessible over the mini-USB CON9 connector on the main board */
&uart0 {
status = "okay";
@@ -134,9 +102,31 @@
status = "okay";
};
-&cps_i2c0 {
+&cps_spi1 {
status = "okay";
- clock-frequency = <100000>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition@400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
+ };
+ };
};
/* CON4 on CP1 expansion */
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
