The mask for the 88E1510 meant that the 88E1518 code would never be
used.
Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com>
Reviewed-by: Stefan Roese <s...@denx.de>
---
Note: This has only been tested on a board that uses a Marvell 88E1512
PHY, see subsequent patches.
v2:
No changes
---
drivers/net/phy/marvell.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index ac13a67..95d1492 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -578,7 +578,7 @@ static struct phy_driver M88E1149S_driver = {
static struct phy_driver M88E1510_driver = {
.name = "Marvell 88E1510",
.uid = 0x1410dd0,
- .mask = 0xffffff0,
+ .mask = 0xfffffff,
.features = PHY_GBIT_FEATURES,
.config = &m88e1510_config,
.startup = &m88e1011s_startup,
@@ -588,7 +588,7 @@ static struct phy_driver M88E1510_driver = {
static struct phy_driver M88E1518_driver = {
.name = "Marvell 88E1518",
.uid = 0x1410dd1,
- .mask = 0xffffff0,
+ .mask = 0xfffffff,
.features = PHY_GBIT_FEATURES,
.config = &m88e1518_config,
.startup = &m88e1011s_startup,
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
