On 12/15/2016 04:55 AM, Masahiro Yamada wrote: > Hi. > > The recent GCC versions catch unused variables. > > This makes build testing noisy. > > Of course, we could use old GCC when running Buildman, > but it would be nicer to eliminate the root causes. > > I got the following when I recently ran Buildman with arm/aarch64 GCC 6.1. > > > drivers/usb/gadget/dwc2_udc_otg.c was fixed lately, > but there are still many warnings to be fixed. > > Board maintainers, please check your own boards.
YES, SIR ! > Or, somebody who volunteers to fix them? Thanks! mxs should be fixed and dwc2 usb was fixed by you , thanks :) > w+../arch/arm/cpu/arm926ejs/mxs/spl_boot.c:44:26: warning: > 'iomux_boot' defined but not used [-Wunused-const-variable=] > w+../common/cli_readline.c:20:21: warning: 'tab_seq' defined but not > used [-Wunused-const-variable=] > w+../common/cli_readline.c:19:19: warning: 'erase_seq' defined but not > used [-Wunused-const-variable=] > w+../drivers/usb/gadget/dwc2_udc_otg.c:72:19: warning: 'driver_desc' > defined but not used [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap4/hw_data.c:136:3: warning: > 'abe_dpll_params_sysclk_196608khz' defined but not used > [-Wunused-const-variable=] > w+../drivers/clk/rockchip/clk_rk3288.c:135:29: warning: > 'cpll_init_cfg' defined but not used [-Wunused-const-variable=] > w+../drivers/clk/rockchip/clk_rk3288.c:134:29: warning: > 'gpll_init_cfg' defined but not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:226:33: warning: 'dual_0S' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:213:33: warning: 'dual_S0' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:196:33: warning: 'dual_0D' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:179:33: warning: 'dual_D0' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:162:33: warning: 'dual_SS' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:140:33: warning: 'dual_SD' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:119:33: warning: 'dual_DS' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:92:33: warning: 'dual_DD' defined but > not used [-Wunused-const-variable=] > w+../drivers/usb/gadget/ether.c:501:17: warning: 'mdlm_detail_desc' > defined but not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:80:33: warning: 'single_S' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:63:33: warning: 'single_D' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:36:33: warning: 'single_Q' defined but > not used [-Wunused-const-variable=] > w+../board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c:228:29: > warning: 'usdhc1_pads' defined but not used [-Wunused-const-variable=] > w+../drivers/net/eepro100.c:210:19: warning: 'i82557_config_cmd' > defined but not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:456:33: warning: 'dual_0S' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:443:33: warning: 'dual_S0' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:426:33: warning: 'dual_0D' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:409:33: warning: 'dual_D0' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:392:33: warning: 'dual_SS' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:370:33: warning: 'dual_SD' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:349:33: warning: 'dual_DS' defined but > not used [-Wunused-const-variable=] > w+../drivers/ddr/fsl/options.c:322:33: warning: 'dual_DD' defined but > not used [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap5/hw_data.c:204:33: warning: > 'abe_dpll_params_32k_196608khz' defined but not used > [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap5/hw_data.c:131:4: warning: > 'core_dpll_params_2128mhz_ddr266_es2' defined but not used > [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap5/hw_data.c:120:4: warning: > 'core_dpll_params_2128mhz_ddr266' defined but not used > [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap5/hw_data.c:65:33: warning: > 'mpu_dpll_params_499mhz' defined but not used > [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap5/hw_data.c:54:33: warning: > 'mpu_dpll_params_400mhz' defined but not used > [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap5/hw_data.c:32:33: warning: > 'mpu_dpll_params_1_5ghz' defined but not used > [-Wunused-const-variable=] > w+../board/phytec/pcm058/pcm058.c:136:29: warning: 'gpios_pads' > defined but not used [-Wunused-const-variable=] > w+../board/phytec/pcm058/pcm058.c:171:29: warning: 'usdhc4_pads' > defined but not used [-Wunused-const-variable=] > w+../board/phytec/pcm058/pcm058.c:112:29: warning: 'nfc_pads' defined > but not used [-Wunused-const-variable=] > w+../board/bachmann/ot1200/ot1200.c:276:29: warning: 'pwm_pad' defined > but not used [-Wunused-const-variable=] > w+../arch/arm/mach-omap2/omap5/hw_data.c:193:3: warning: > 'abe_dpll_params_sysclk_196608khz' defined but not used > [-Wunused-const-variable=] > w+../drivers/video/ld9040.c:69:28: warning: 'SEQ_SLPIN' defined but > not used [-Wunused-const-variable=] > w+../drivers/video/ld9040.c:49:28: warning: 'SEQ_APON' defined but not > used [-Wunused-const-variable=] > w+../drivers/video/ld9040.c:25:28: warning: 'SEQ_TEMP_SWIRE' defined > but not used [-Wunused-const-variable=] > w+../drivers/video/ld9040.c:13:28: warning: 'SEQ_SWRESET' defined but > not used [-Wunused-const-variable=] > w+../board/toradex/colibri_imx7/colibri_imx7.c:101:29: warning: > 'usdhc3_emmc_pads' defined but not used [-Wunused-const-variable=] > w+../arch/arm/mach-rockchip/rk3036-board-spl.c:19:34: warning: 'grf' > defined but not used [-Wunused-const-variable=] > w+../board/congatec/cgtqmx6eval/cgtqmx6eval.c:84:29: warning: > 'usdhc3_pads' defined but not used [-Wunused-const-variable=] > w+../board/congatec/cgtqmx6eval/cgtqmx6eval.c:74:29: warning: > 'usdhc2_pads' defined but not used [-Wunused-const-variable=] > w+../drivers/usb/gadget/at91_udc.c:1506:35: warning: > 'at91sam9263_udc_caps' defined but not used [-Wunused-const-variable=] > w+../drivers/usb/gadget/at91_udc.c:1389:35: warning: > 'at91rm9200_udc_caps' defined but not used [-Wunused-const-variable=] > w+../board/gateworks/gw_ventana/common.c:140:29: warning: > 'gwproto_gpio_pads' defined but not used [-Wunused-const-variable=] > > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
