On Sat, Dec 17, 2016 at 2:46 PM, Simon Glass <s...@chromium.org> wrote: > Hi Maxim, > > On 16 December 2016 at 17:18, Maxim Sloyko <max...@google.com> wrote: >> Greetings, >> >> I'm working on adding new platform to U-Boot and right now I'm trying >> to clean up the directory structure, but running into a problem of >> Make not recursing into a subdirectory that I've created. >> >> in my arch/arm/mach-aspeed/Makefile I have this: >> >> obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o >> >> and then in arch/arm/mach-aspeed/ast2500/Makefile: >> >> $obj-y += clk_ast2500.o sdram_ast2500.o > > What is the $ for? I don't think you want that.
Oh my, I can't believe I was that stupid :) Thanks for the help, that's what the problem was. > >> >> When I try to build everything, I get this error: >> >> arm-linux-gnueabi-ld.bfd: cannot find >> arch/arm/mach-aspeed/ast2500/built-in.o: No such file or directory >> >> If instead in arch/arm/mach-aspeed/Makefile I specify: >> >> obj-$(CONFIG_ASPEED_AST2500) += ast2500/clk_ast2500.o >> ast2500/sdram_ast2500.o ast2500-board.o >> >> (That is, I just added binaries from the lower level dir explicitly) >> >> everything builds fine, which means that CONFIG_ASPEED_AST2500 is defined. >> >> Any ideas what might be the problem here? >> >> If you need more details, you can see the code here >> https://github.com/maksymko/u-boot/tree/aspeed_ast2500_evb/arch/arm/mach-aspeed >> >> Many thanks for the help! >> >> -- >> Maxim Sloyko > > Regards, > Simon -- Maxim Sloyko _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot