From: Tien Fong Chee <tien.fong.c...@intel.com>

Add system manager defines for Arria10.

Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
Cc: Marek Vasut <ma...@denx.de>
Cc: Dinh Nguyen <dingu...@kernel.org>
Cc: Chin Liang See <chin.liang....@intel.com>
Cc: Tien Fong <skywind...@gmail.com>
---
 .../arm/mach-socfpga/include/mach/system_manager.h | 122 +++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm/mach-socfpga/include/mach/system_manager.h 
b/arch/arm/mach-socfpga/include/mach/system_manager.h
index c45edea..e688c50 100644
--- a/arch/arm/mach-socfpga/include/mach/system_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/system_manager.h
@@ -15,6 +15,7 @@ void sysmgr_config_warmrstcfgio(int enable);
 void sysmgr_get_pinmux_table(const u8 **table, unsigned int *table_len);
 #endif
 
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 struct socfpga_system_manager {
        /* System Manager Module */
        u32     siliconid1;                     /* 0x00 */
@@ -115,6 +116,77 @@ struct socfpga_system_manager {
        u32     _pad_0x734;
        u32     spim0usefpga;                   /* 0x738 */
 };
+#else /* Arria10 System Manager */
+struct socfpga_system_manager {
+       u32  siliconid1;
+       u32  siliconid2;
+       u32  wddbg;
+       u32  bootinfo;
+       u32  mpu_ctrl_l2_ecc;
+       u32  _pad_0x14_0x1f[3];
+       u32  dma;
+       u32  dma_periph;
+       u32  sdmmcgrp_ctrl;
+       u32  sdmmc_l3master;
+       u32  nand_bootstrap;
+       u32  nand_l3master;
+       u32  usb0_l3master;
+       u32  usb1_l3master;
+       u32  emac_global;
+       u32  emac0;
+       u32  emac1;
+       u32  emac2;
+       u32  _pad_0x50_0x5f[4];
+       u32  fpgaintf_en_global;
+       u32  fpgaintf_en_0;
+       u32  fpgaintf_en_1;
+       u32  fpgaintf_en_2;
+       u32  fpgaintf_en_3;
+       u32  _pad_0x74_0x7f[3];
+       u32  noc_addr_remap_value;
+       u32  noc_addr_remap_set;
+       u32  noc_addr_remap_clear;
+       u32  _pad_0x8c_0x8f;
+       u32  ecc_intmask_value;
+       u32  ecc_intmask_set;
+       u32  ecc_intmask_clr;
+       u32  ecc_intstatus_serr;
+       u32  ecc_intstatus_derr;
+       u32  mpu_status_l2_ecc;
+       u32  mpu_clear_l2_ecc;
+       u32  mpu_status_l1_parity;
+       u32  mpu_clear_l1_parity;
+       u32  mpu_set_l1_parity;
+       u32  _pad_0xb8_0xbf[2];
+       u32  noc_timeout;
+       u32  noc_idlereq_set;
+       u32  noc_idlereq_clr;
+       u32  noc_idlereq_value;
+       u32  noc_idleack;
+       u32  noc_idlestatus;
+       u32  fpga2soc_ctrl;
+       u32  _pad_0xdc_0xff[9];
+       u32  tsmc_tsel_0;
+       u32  tsmc_tsel_1;
+       u32  tsmc_tsel_2;
+       u32  tsmc_tsel_3;
+       u32  _pad_0x110_0x200[60];
+       u32  romhw_ctrl;
+       u32  romcode_ctrl;
+       u32  romcode_cpu1startaddr;
+       u32  romcode_initswstate;
+       u32  romcode_initswlastld;
+       u32  _pad_0x214_0x217;
+       u32  warmram_enable;
+       u32  warmram_datastart;
+       u32  warmram_length;
+       u32  warmram_execution;
+       u32  warmram_crc;
+       u32  _pad_0x22c_0x22f;
+       u32  isw_handoff[8];
+       u32  romcode_bootromswstate[8];
+};
+#endif
 
 #define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX        (1 << 0)
 #define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO    (1 << 1)
@@ -146,4 +218,54 @@ struct socfpga_system_manager {
 #define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB                        2
 #define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK                        0x3
 
+/* For dedicated IO configuration */
+/* Voltage select enums */
+#define VOLTAGE_SEL_3V         0x0
+#define VOLTAGE_SEL_1P8V       0x1
+#define VOLTAGE_SEL_2P5V       0x2
+
+/* Input buffer enable */
+#define INPUT_BUF_DISABLE      0
+#define INPUT_BUF_1P8V         1
+#define INPUT_BUF_2P5V3V       2
+
+/* Weak pull up enable */
+#define WK_PU_DISABLE          0
+#define WK_PU_ENABLE           1
+
+/* Pull up slew rate control */
+#define PU_SLW_RT_SLOW         0
+#define PU_SLW_RT_FAST         1
+#define PU_SLW_RT_DEFAULT      PU_SLW_RT_SLOW
+
+/* Pull down slew rate control */
+#define PD_SLW_RT_SLOW         0
+#define PD_SLW_RT_FAST         1
+#define PD_SLW_RT_DEFAULT      PD_SLW_RT_SLOW
+
+/* Drive strength control */
+#define PU_DRV_STRG_DEFAULT    0x10
+#define PD_DRV_STRG_DEFAULT    0x10
+
+/* bit position */
+#define PD_DRV_STRG_LSB                0
+#define PD_SLW_RT_LSB          5
+#define PU_DRV_STRG_LSB                8
+#define PU_SLW_RT_LSB          13
+#define WK_PU_LSB              16
+#define INPUT_BUF_LSB          17
+#define BIAS_TRIM_LSB          19
+#define VOLTAGE_SEL_LSB                0
+
+#define ALT_SYSMGR_NOC_H2F_SET_MSK     0x00000001
+#define ALT_SYSMGR_NOC_LWH2F_SET_MSK   0x00000010
+#define ALT_SYSMGR_NOC_F2H_SET_MSK     0x00000100
+#define ALT_SYSMGR_NOC_F2SDR0_SET_MSK  0x00010000
+#define ALT_SYSMGR_NOC_F2SDR1_SET_MSK  0x00100000
+#define ALT_SYSMGR_NOC_F2SDR2_SET_MSK  0x01000000
+#define ALT_SYSMGR_NOC_TMO_EN_SET_MSK  0x00000001
+
+#define ALT_SYSMGR_ECC_INTSTAT_SERR_OCRAM_SET_MSK      0x00000002
+#define ALT_SYSMGR_ECC_INTSTAT_DERR_OCRAM_SET_MSK      0x00000002
+
 #endif /* _SYSTEM_MANAGER_H_ */
-- 
2.2.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to