SPL mmc device index is get based on the boot device, like - BOOT_DEVICE_MMC1 for mmc device 0 - BOOT_DEVICE_MMC2 for mmc device 1
Currently BOOT_DEVICE_MMC1 is setting both SD/eSD and MMC/eMMC boot devices in i.MX, So u-boot is loading from mmc device 0 even "if the board booting from SD/eSD or MMC/eMMC" So, this patch set BOOT_DEVICE_MMC2 for MMC/eMMC so for MMC/eMMC the u-boot is loading from mmc device 1 and the board file need to take care if the board have different mmc device order intialization. Cc: Stefano Babic <[email protected]> Cc: Matteo Lisi <[email protected]> Cc: Michael Trimarchi <[email protected]> Signed-off-by: Jagan Teki <[email protected]> --- board/engicam/icorem6_rqs/icorem6_rqs.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c index 2769177..fc602a1 100644 --- a/board/engicam/icorem6_rqs/icorem6_rqs.c +++ b/board/engicam/icorem6_rqs/icorem6_rqs.c @@ -125,6 +125,32 @@ int board_mmc_init(bd_t *bis) return 0; } + +#ifdef CONFIG_ENV_IS_IN_MMC +void board_boot_order(u32 *spl_boot_list) +{ + u32 bmode = imx6_src_get_boot_mode(); + u8 boot_dev = BOOT_DEVICE_MMC1; + + switch ((bmode & 0x000000FF) >> 4) { + case 0x4: + case 0x5: + /* SD/eSD - BOOT_DEVICE_MMC1 */ + break; + case 0x6: + case 0x7: + /* MMC/eMMC */ + boot_dev = BOOT_DEVICE_MMC2; + break; + default: + /* Default - BOOT_DEVICE_MMC1 */ + printf("Wrong board boot order\n"); + break; + } + + spl_boot_list[0] = boot_dev; +} +#endif #endif /* -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
