On 06/01/2017 00:33, Fabio Estevam wrote: > From: Fabio Estevam <[email protected]> > > Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to > Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update > the mxc_hab README file to reflect that. > > Signed-off-by: Fabio Estevam <[email protected]> > --- > doc/README.mxc_hab | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab > index b688580..c1f8ded 100644 > --- a/doc/README.mxc_hab > +++ b/doc/README.mxc_hab > @@ -2,10 +2,9 @@ High Assurance Boot (HAB) for i.MX6 CPUs > > To enable the authenticated or encrypted boot mode of U-Boot, it is > required to set the proper configuration for the target board. This > -is done by adding the following configuration in in the proper config > -file (e.g. include/configs/mx6qarm2.h) > +is done by adding the following configuration in the defconfig file: > > -#define CONFIG_SECURE_BOOT > +CONFIG_SECURE_BOOT=y > > In addition, the U-Boot image to be programmed into the > boot media needs to be properly constructed, i.e. it must contain a >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
