Since commit c0efc3140e75 ("ARM: uniphier: change CONFIG_SPL_PAD_TO
to 128KB"), the u-boot.bin should be burned at the offset 0x20000.
I missed to update README.uniphier in that commit. Now updating.
Signed-off-by: Masahiro Yamada <[email protected]>
---
doc/README.uniphier | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/README.uniphier b/doc/README.uniphier
index 539b1f2..f79659c 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -75,7 +75,7 @@ Burn U-Boot images to NAND
Write the following to the NAND device:
- spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.bin at the offset address 0x00010000
+ - u-boot.bin at the offset address 0x00020000
or
@@ -94,7 +94,7 @@ Burn U-Boot images to eMMC
Write the following to the Boot partition 1 of the eMMC device:
- spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.bin at the offset address 0x00010000
+ - u-boot.bin at the offset address 0x00020000
or
@@ -179,4 +179,4 @@ newer SoCs. Even if it is, EA[25] is not connected on most
of the boards.
--
Masahiro Yamada <[email protected]>
-Oct. 2016
+Jan. 2017
--
2.7.4
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
