Sets the tapdelays for eMMC HS200 mode support for
ZynqMP as tapdelays needs to be programmed for it to
work
Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com>
---
Changes from v1:
- None
---
board/xilinx/zynqmp/tap_delays.c | 1 +
drivers/mmc/zynq_sdhci.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/xilinx/zynqmp/tap_delays.c b/board/xilinx/zynqmp/tap_delays.c
index d57587e..aa0825a 100644
--- a/board/xilinx/zynqmp/tap_delays.c
+++ b/board/xilinx/zynqmp/tap_delays.c
@@ -235,6 +235,7 @@ void arasan_zynqmp_set_tapdelay(u8 deviceid, u8 timing, u8
bank)
arasan_zynqmp_tap_sdr50(deviceid, timing, bank);
break;
case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
arasan_zynqmp_tap_sdr104(deviceid, timing, bank);
break;
case MMC_TIMING_UHS_DDR50:
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 4875a4e..8fa5df8 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -151,7 +151,7 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host
*host, u8 uhsmode)
debug("%s, %d:%d, mode:%d\n", __func__, priv->deviceid, priv->bank,
uhsmode);
if ((uhsmode >= MMC_TIMING_UHS_SDR25) &&
- (uhsmode <= MMC_TIMING_UHS_DDR50))
+ (uhsmode <= MMC_TIMING_HS200))
arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode,
priv->bank);
}
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
