On 02/06/2017 01:30 PM, Grygorii Strashko wrote:
On 02/06/2017 01:43 PM, Andrew F. Davis wrote:
On 02/06/2017 12:47 PM, Alex wrote:
On 02/06/2017 07:52 AM, Andrew F. Davis wrote:
On 02/03/2017 05:42 PM, Alexandru Gagniuc wrote:
This reverts commit 4623f974a585b59bd07fb60a326a096290aa4c53.
This confuses the #ifdef logic in am33xx/board.c. This results in
undefined symbols when USB gadget mode is disabled in .config.
The CONFIG_DM_USB seems has nothing common with issue you're trying to fix here.
problem you saw depends on
It seems that arch_misc_init() is not properly guarded with
CONFIG_MUSB_* (see Appendix A).
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
Yeah, it's a nightmare.
sry, but NACK.
And Could you add error output from your log to the commit message next time,
please?
I got grilled for doing this in other projects, so I generally avoid it,
but sure, I can do it when requested.
Alex
APPENDIX A:
if (!CONFIG_DM_USB && CONFIG_MUSB* && CONFIG_AM335X_USB*) {
if(CONFIG_AM335X_USB0) {
declare otg0_board_data
declare otg0_plat
}
if(CONFIG_AM335X_USB1) {
declare otg1_board_data
declare otg1_plat
}
}
if (!CONFIG_DM_USB) {
if(CONFIG_AM335X_USB0) {
use otg0_board_data
use otg0_plat
}
if(CONFIG_AM335X_USB1) {
use otg1_board_data
use otg1_plat
}
} else {
/* Don't care */
}
Smth. like this:
arch/arm/mach-omap2/am33xx/board.c: In function 'arch_misc_init':
arch/arm/mach-omap2/am33xx/board.c:199:17: error: 'otg0_plat' undeclared (first
use in this function)
musb_register(&otg0_plat, &otg0_board_data,
^
arch/arm/mach-omap2/am33xx/board.c:199:17: note: each undeclared identifier is
reported only once for each function it appears in
arch/arm/mach-omap2/am33xx/board.c:199:29: error: 'otg0_board_data' undeclared
(first use in this function)
musb_register(&otg0_plat, &otg0_board_data,
^
arch/arm/mach-omap2/am33xx/board.c:203:17: error: 'otg1_plat' undeclared (first
use in this function)
musb_register(&otg1_plat, &otg1_board_data,
^
arch/arm/mach-omap2/am33xx/board.c:203:29: error: 'otg1_board_data' undeclared
(first use in this function)
musb_register(&otg1_plat, &otg1_board_data,
Undefined symbols will happen until the Kconfig conversion is finished
and some proper kconfig dependencies are defined. In the meantime, the
only other fix for this commit will be to convert DM_USB code to work
with SPL.
Of course! And as you noticed this patch is a "lesser of two evils" fix.
I do not have the bandwidth to rework the USB/SPL code, though I would
like to avoid blocking ACRS2 support on SPL refactoring. Is this
reasonable?
Absolutely reasonable to me, because I too do not have spare bandwidth
for this, I just like pointing it out every-time someone messes with SPL
and DM, maybe someday someone will find the time actually fix it, then I
can at least feel like I helped :)
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot