On Wednesday 08 February 2017 06:43 PM, Sekhar Nori wrote: > As per the latest pinmux data available for AM572x EVM, > rev A3, input should be enabled on MMC clock lines for > MMC2/2/3 for stable operation. > > Further, AM572x TRM, SPRUHZ6, Revised June 2016, in > section 18.4.6.1.1 "Pad Configuration Registers" states > that input should be enabled for MMC 2/3/4 clock lines. > > Enable input on MMC1 and MMC3 clock to match the latest > pinmux data. Input is already enabled on MMC2 clock for > BeagleBoard x15. Further, input is already enabled on all > MMCx clocks for other AM57xx boards (AM572x and AM571x > IDK). > > Tested with HS and UHS SD card on AM572x EVM Rev A3. > > Signed-off-by: Sekhar Nori <[email protected]>
Reviewed-by: Lokesh Vutla <[email protected]> Thanks and regards, Lokesh _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
