Hello Masahiro,
Am 11.02.2017 um 04:39 schrieb Masahiro Yamada:
With the Kconfig re-sync with Linux 4.10, characters such as
'}', ';' in Kconfig help message cause warnings:
$ make defconfig
*** Default configuration is based on 'sandbox_defconfig'
drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}'
drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';'
Drop the Device Tree fragment from the help.
Signed-off-by: Masahiro Yamada <[email protected]>
---
drivers/i2c/Kconfig | 23 +----------------------
1 file changed, 1 insertion(+), 22 deletions(-)
Thanks!
Acked-by: Heiko Schocher <[email protected]>
bye,
Heiko
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 71cc173..39f62da 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -132,28 +132,7 @@ config SYS_I2C_SANDBOX
help
Enable I2C support for sandbox. This is an emulation of a real I2C
bus. Devices can be attached to the bus using the device tree
- which specifies the driver to use. As an example, see this device
- tree fragment from sandbox.dts. It shows that the I2C bus has a
- single EEPROM at address 0x2c (7-bit address) which is emulated by
- the driver for "sandbox,i2c-eeprom", which is in
- drivers/misc/i2c_eeprom_emul.c.
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- compatible = "sandbox,i2c";
- clock-frequency = <400000>;
- eeprom@2c {
- reg = <0x2c>;
- compatible = "i2c-eeprom";
- emul {
- compatible = "sandbox,i2c-eeprom";
- sandbox,filename = "i2c.bin";
- sandbox,size = <128>;
- };
- };
- };
+ which specifies the driver to use. See sandbox.dts as an example.
config SYS_I2C_S3C24X0
bool "Samsung I2C driver"
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
