On Mon, Feb 13, 2017 at 11:44:57AM +0100, Axel Haslam wrote: > The uboot binary on the AIS file starts at offset 0x8000. > This would be sector 0x40 on a mmc card with 512 bytes per > sector: 0x8000/0x200 = 0x40. > > But because we usually skip the first mmc sector to preserve > the partition table, the ais image is written starting > on sector 0x1, and the u-boot binary ends up at sector 0x41. > > Set the address of the u-boot binary to 0x41 so that spl > can correctly jump to it. > > Signed-off-by: Axel Haslam <ahas...@baylibre.com> > --- > configs/omapl138_lcdk_defconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig > index d20af19..a249ebd 100644 > --- a/configs/omapl138_lcdk_defconfig > +++ b/configs/omapl138_lcdk_defconfig > @@ -12,7 +12,7 @@ CONFIG_VERSION_VARIABLE=y > # CONFIG_DISPLAY_BOARDINFO is not set > CONFIG_BOARD_EARLY_INIT_F=y > CONFIG_SPL=y > -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5 > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x41
Since we're changing a default here, and one that will lead to non-booting boards if you don't notice, where did the old value come from, and is it actually in use anywhere? Thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot