Instead of enumerating all SoC families that need that bit set, let's
just express this more clearly: The SMP bits needs to be set on
SMP capable ARMv7 CPUs. It's much easier in Kconfig to express it the
other way round, so we use ! CPU_IS_UP and ! ARM64.

Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
 arch/arm/Kconfig            | 4 ++++
 arch/arm/mach-sunxi/board.c | 5 +----
 board/sunxi/Kconfig         | 2 ++
 3 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0229800..240320a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,10 @@ config ENABLE_ARM_SOC_BOOT0_HOOK
          ARM_SOC_BOOT0_HOOK which contains the required assembler
          preprocessor code.
 
+config ARM_CORTEX_CPU_IS_UP
+       bool
+       default n
+
 config USE_ARCH_MEMCPY
        bool "Use an assembly optimized implementation of memcpy"
        default y
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 58fbacb..fdcf68e 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -180,10 +180,7 @@ void s_init(void)
        /* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
 #endif
 
-#if defined CONFIG_MACH_SUN6I || \
-    defined CONFIG_MACH_SUN7I || \
-    defined CONFIG_MACH_SUN8I || \
-    defined CONFIG_MACH_SUN9I
+#if !defined(CONFIG_ARM_CORTEX_CPU_IS_UP) && !defined(CONFIG_ARM64)
        /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
        asm volatile(
                "mrc p15, 0, r0, c1, c0, 1\n"
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 37b4252..ea0d658 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -50,12 +50,14 @@ choice
 config MACH_SUN4I
        bool "sun4i (Allwinner A10)"
        select CPU_V7
+       select ARM_CORTEX_CPU_IS_UP
        select SUNXI_GEN_SUN4I
        select SUPPORT_SPL
 
 config MACH_SUN5I
        bool "sun5i (Allwinner A13)"
        select CPU_V7
+       select ARM_CORTEX_CPU_IS_UP
        select SUNXI_GEN_SUN4I
        select SUPPORT_SPL
 
-- 
2.8.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to