On Mon, Jan 23, 2017 at 11:46 AM, Marek Vasut <[email protected]> wrote: > On 01/10/2017 06:20 AM, Chee Tien Fong wrote: >> From: Tien Fong Chee <[email protected]> >> >> Add config for the Arria10 SoC Development Kit. >> >> Signed-off-by: Dinh Nguyen <[email protected]> >> Signed-off-by: Tien Fong Chee <[email protected]> >> Acked-by: Marek Vasut <[email protected]> >> Cc: Marek Vasut <[email protected]> >> Cc: Dinh Nguyen <[email protected]> >> Cc: Chin Liang See <[email protected]> >> Cc: Tien Fong <[email protected]> >> --- >> include/configs/socfpga_arria10_socdk.h | 94 >> +++++++++++++++++++++++++++++++++ >> 1 file changed, 94 insertions(+) >> create mode 100644 include/configs/socfpga_arria10_socdk.h >> >> diff --git a/include/configs/socfpga_arria10_socdk.h >> b/include/configs/socfpga_arria10_socdk.h >> new file mode 100644 >> index 0000000..577f60f >> --- /dev/null >> +++ b/include/configs/socfpga_arria10_socdk.h >> @@ -0,0 +1,94 @@ >> +/* >> + * Copyright (C) 2015 Altera Corporation <www.altera.com> > > 2017 ... fix globally. Okay > >> + * SPDX-License-Identifier: GPL-2.0 >> + */ >> + >> +#ifndef __CONFIG_SOCFGPA_ARRIA10_H__ >> +#define __CONFIG_SOCFGPA_ARRIA10_H__ >> + >> +#include <asm/arch/base_addr_a10.h> >> +/* U-Boot Commands */ >> +#define CONFIG_SYS_NO_FLASH >> +#define CONFIG_DOS_PARTITION >> +#define CONFIG_FAT_WRITE >> +#define CONFIG_HW_WATCHDOG >> + >> +#define CONFIG_CMD_ASKENV >> +#define CONFIG_CMD_BOOTZ >> +#define CONFIG_CMD_CACHE >> +#define CONFIG_CMD_DHCP >> +#define CONFIG_CMD_EXT4 >> +#define CONFIG_CMD_EXT4_WRITE >> +#define CONFIG_CMD_FAT >> +#define CONFIG_CMD_FS_GENERIC >> +#define CONFIG_CMD_GREPENV >> +#define CONFIG_CMD_MMC >> +#define CONFIG_CMD_PING > > A lot of this stuff was converted to Kconfig, please recheck. Okay, will update this. > >> +/* >> + * Memory configurations >> + */ >> +#define PHYS_SDRAM_1_SIZE 0x2000000 >> + >> +/* Booting Linux */ >> +#define CONFIG_BOOTDELAY 3 >> +#define CONFIG_BOOTFILE "zImage" >> +#define CONFIG_BOOTARGS "console=ttyS0," >> __stringify(CONFIG_BAUDRATE) >> +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" >> +#define CONFIG_LOADADDR 0x01000000 >> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR >> + >> +/* >> + * Display CPU and Board Info >> + */ >> +#define CONFIG_DISPLAY_CPUINFO >> +#define CONFIG_DISPLAY_BOARDINFO >> +#define CONFIG_DISPLAY_BOARDINFO_LATE >> + >> +/* Ethernet on SoC (EMAC) */ >> +#if defined(CONFIG_CMD_NET) >> + >> +/* PHY */ >> +#define CONFIG_PHY_MICREL >> +#define CONFIG_PHY_MICREL_KSZ9031 >> + >> +#endif >> + >> +#define CONFIG_ENV_IS_IN_MMC >> +#define CONFIG_SYS_MMC_ENV_DEV 0/* device 0 */ >> +#define CONFIG_ENV_OFFSET 512/* just after the MBR */ >> + >> +/* >> + * arguments passed to the bootz command. The value of >> + * CONFIG_BOOTARGS goes into the environment value "bootargs". >> + * Do note the value will overide also the chosen node in FDT blob. >> + */ >> +#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) >> + >> +#define CONFIG_EXTRA_ENV_SETTINGS \ >> + "verify=n\0" \ >> + "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ >> + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ >> + "bootm ${loadaddr} - ${fdt_addr}\0" \ >> + "bootimage=zImage\0" \ >> + "fdt_addr=100\0" \ >> + "fdtimage=socfpga.dtb\0" \ >> + "fsloadcmd=ext2load\0" \ >> + "bootm ${loadaddr} - ${fdt_addr}\0" \ >> + "mmcroot=/dev/mmcblk0p2\0" \ >> + "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ >> + " root=${mmcroot} rw rootwait;" \ >> + "bootz ${loadaddr} - ${fdt_addr}\0" \ >> + "mmcload=mmc rescan;" \ >> + "load mmc 0:1 ${loadaddr} ${bootimage};" \ >> + "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ >> + "qspiroot=/dev/mtdblock0\0" \ >> + "qspirootfstype=jffs2\0" \ >> + "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ >> + " root=${qspiroot} rw rootfstype=${qspirootfstype};"\ >> + "bootm ${loadaddr} - ${fdt_addr}\0" > > Take a look at: > [PATCH v2 0/7] arm: socfpga: update socfpga environments > and adjust accordingly. I checked this patch series, it is in v8 and it hasn't integrate to mainline yet. I will working my patches on top of this patch series, is it okay?
Regards Ley Foon _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
