This patch adds support for having a "fixed-link" to some other MAC
(like some embedded switch-device).

For this purpose we introduce a new phy-driver, called "Fixed PHY".

Fixed PHY works only with CONFIG_DM_ETH enabled, since the fixed-link is
described with a subnode below ethernet interface.

Most ethernet drivers (unfortunately not all are following same scheme
for searching/attaching phys) are calling "phy_connect(...)" for getting
a phy-device.
At this point we link in, we search here for a subnode called "fixed-
link", once found we start phy_device_create(...) with the special phy-
id PHY_FIXED_ID (0xa5a55a5a).

During init the "Fixed PHY" driver has registered with this id and now
gets probed, during probe we get all the details about fixed-link out of
dts, later on the phy reports this values.

Signed-off-by: Hannes Schmelzer <[email protected]>

---

 drivers/net/phy/Makefile |  1 +
 drivers/net/phy/fixed.c  | 86 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/phy/phy.c    | 23 +++++++++++--
 include/phy.h            |  3 ++
 4 files changed, 110 insertions(+), 3 deletions(-)
 create mode 100644 drivers/net/phy/fixed.c

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index d372971..88c00a5 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_PHY_TI) += ti.o
 obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o
 obj-$(CONFIG_PHY_VITESSE) += vitesse.o
 obj-$(CONFIG_PHY_MSCC) += mscc.o
+obj-$(CONFIG_PHY_FIXED) += fixed.o
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
new file mode 100644
index 0000000..fc86a3f
--- /dev/null
+++ b/drivers/net/phy/fixed.c
@@ -0,0 +1,86 @@
+/*
+ * Fixed-Link phy
+ *
+ * Copyright 2017 Bernecker & Rainer Industrieelektronik GmbH
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+#include <dm.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int fixedphy_probe(struct phy_device *phydev)
+{
+       struct fixed_link *priv;
+       int ofnode = phydev->addr;
+       u32 val;
+
+       debug("%s: start.\n", __func__);
+       /* check for mandatory properties within fixed-link node */
+       val = fdt_getprop_u32_default_node(gd->fdt_blob,
+                                          ofnode, 0, "speed", ~0UL);
+       if (val == ~0UL ||
+           (val != SPEED_10 && val != SPEED_1000 && val != SPEED_1000)) {
+               printf("ERROR: no/invalid speed given in fixed-link node!");
+               return -1;
+       }
+
+       priv = malloc(sizeof(*priv));
+       if (!priv)
+               return -ENOMEM;
+       memset(priv, 0, sizeof(*priv));
+
+       phydev->priv = priv;
+       phydev->addr = 0;
+
+       priv->link_speed = val;
+       priv->duplex = fdtdec_get_bool(gd->fdt_blob, ofnode, "full-duplex");
+       priv->pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "pause");
+       priv->asym_pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "asym-pause");
+
+       /* set this for preventing stack doing some unary reset */
+       phydev->flags |= PHY_FLAG_BROKEN_RESET;
+
+       return 0;
+}
+
+int fixedphy_startup(struct phy_device *phydev)
+{
+       struct fixed_link *priv = phydev->priv;
+
+       debug("%s: start.\n", __func__);
+
+       phydev->asym_pause = priv->asym_pause;
+       phydev->pause = priv->pause;
+       phydev->duplex = priv->duplex;
+       phydev->speed = priv->link_speed;
+       phydev->link = 1;
+
+       return 0;
+}
+
+int fixedphy_shutdown(struct phy_device *phydev)
+{
+       return 0;
+}
+
+static struct phy_driver fixedphy_driver = {
+       .uid            = PHY_FIXED_ID,
+       .mask           = 0xffffffff,
+       .name           = "Fixed PHY",
+       .features       = PHY_GBIT_FEATURES | SUPPORTED_MII,
+       .probe          = fixedphy_probe,
+       .startup        = fixedphy_startup,
+       .shutdown       = fixedphy_shutdown,
+};
+
+int phy_fixed_init(void)
+{
+       phy_register(&fixedphy_driver);
+       return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 8db6574..a569d0b 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -515,7 +515,9 @@ int phy_init(void)
 #ifdef CONFIG_PHY_MSCC
        phy_mscc_init();
 #endif
-
+#ifdef CONFIG_PHY_FIXED
+       phy_fixed_init();
+#endif
        return 0;
 }
 
@@ -854,9 +856,24 @@ struct phy_device *phy_connect(struct mii_dev *bus, int 
addr,
                struct eth_device *dev, phy_interface_t interface)
 #endif
 {
-       struct phy_device *phydev;
+       struct phy_device *phydev = NULL;
+#if defined(CONFIG_DM_ETH) && defined(CONFIG_PHY_FIXED)
+       int sn;
+       const char *name;
+       sn = fdt_first_subnode(gd->fdt_blob, dev->of_offset);
+       while (sn > 0) {
+               name = fdt_get_name(gd->fdt_blob, sn, NULL);
+               if (name != NULL && strcmp(name, "fixed-link") == 0) {
+                       phydev = phy_device_create(bus,
+                                                  sn, PHY_FIXED_ID, interface);
+                       break;
+               }
+               sn = fdt_next_subnode(gd->fdt_blob, sn);
+       }
+#endif
+       if (phydev == NULL)
+               phydev = phy_find_by_mask(bus, 1 << addr, interface);
 
-       phydev = phy_find_by_mask(bus, 1 << addr, interface);
        if (phydev)
                phy_connect_dev(phydev, dev);
        else
diff --git a/include/phy.h b/include/phy.h
index 5477496..f5fdc04 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -15,6 +15,8 @@
 #include <linux/ethtool.h>
 #include <linux/mdio.h>
 
+#define PHY_FIXED_ID           0xa5a55a5a
+
 #define PHY_MAX_ADDR 32
 
 #define PHY_FLAG_BROKEN_RESET  (1 << 0) /* soft reset not supported */
@@ -267,6 +269,7 @@ int phy_ti_init(void);
 int phy_vitesse_init(void);
 int phy_xilinx_init(void);
 int phy_mscc_init(void);
+int phy_fixed_init(void);
 
 int board_phy_config(struct phy_device *phydev);
 int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
-- 
1.9.1

_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to