This is needed to make the UMS command work again as it fails with the
following error:
BIOS> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x748000
g_dnl_register: failed!, error: -19
ERROR: g_dnl_register failed
at cmd/usb_mass_storage.c:179/do_usb_mass_storage()
That's because usb_setup_ehci_gadget() function is looking for the usb
device using the req_sed number.
This change makes the usb device have a req_seq number and the UMS
command work again:
BIOS> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x748000
CTRL+C - Operation aborted
Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com>
---
arch/arm/dts/imx6ul.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index c5c05fd..def5f8c 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -43,6 +43,8 @@
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
+ usbotg0 = &usbotg1;
+ usbotg1 = &usbotg2;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
--
2.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
