Enable gmac interface for rk3288 board dts. use "okay" not "ok"
Signed-off-by: Jacob Chen <[email protected]> --- arch/arm/dts/rk3288-evb.dtsi | 22 ++++++++++++++++++++++ arch/arm/dts/rk3288-miniarm.dtsi | 2 +- arch/arm/dts/rk3288-popmetal.dtsi | 2 +- 3 files changed, 24 insertions(+), 2 deletions(-) diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi index cb7d03e..4960f33 100644 --- a/arch/arm/dts/rk3288-evb.dtsi +++ b/arch/arm/dts/rk3288-evb.dtsi @@ -11,6 +11,13 @@ reg = <0 0x80000000>; }; + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + keys: gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -98,6 +105,21 @@ status = "okay"; }; +&gmac { + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; diff --git a/arch/arm/dts/rk3288-miniarm.dtsi b/arch/arm/dts/rk3288-miniarm.dtsi index ceb4e2b..527493c 100644 --- a/arch/arm/dts/rk3288-miniarm.dtsi +++ b/arch/arm/dts/rk3288-miniarm.dtsi @@ -149,7 +149,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { diff --git a/arch/arm/dts/rk3288-popmetal.dtsi b/arch/arm/dts/rk3288-popmetal.dtsi index e5be4cb..dd6ce8b 100644 --- a/arch/arm/dts/rk3288-popmetal.dtsi +++ b/arch/arm/dts/rk3288-popmetal.dtsi @@ -203,7 +203,7 @@ pinctrl-0 = <&rgmii_pins>; tx_delay = <0x30>; rx_delay = <0x10>; - status = "ok"; + status = "okay"; }; &hdmi { -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
