On 24/02/2017 11:02, Jagan Teki wrote: > From: Jagan Teki <ja...@amarulasolutions.com> > > This patch set support Engicam Is.IoT MX6UL board support. > > Changes for v6: > - Remove 'arm: dts: Add MAINTAINERS file' patch > - Rebase to master > > Changes for v5: > - Update ccgr_init so-that it can enable required clocks > - Add new patch for dts files include under board MAINTAINERS > - Add new patch for arch/arm/dts/MAINTAINERS file > - Update 'Reviewed-by: Stefano Babic <sba...@denx.de>' tag > > Changes for v4: > - Rebase to master > > Changes for v3: > - Rebase to master > > Changes for v2: > - Skiped eMMC node patch > - Rebase to master > > Jagan Teki (10): > configs: imx6: Don't define USDHC2_BASE_ADDR > arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support > arm: dts: imx6ul-isiot: Add I2C nodes > imx6: isiotmx6ul: Add I2C support > arm: dts: imx6ul-isiot: Add FEC node > imx6: isiotmx6ul: Add FEC support > imx6: isiotmx6ul: Add NAND support > imx6: isiotmx6ul: Add nandboot env support > imx6ul: isiotmx6ul: Enable I2C support > i.MX6: engicam: Include dts files under MAINTAINERS > > arch/arm/cpu/armv7/mx6/Kconfig | 12 ++ > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/imx6ul-isiot-mmc.dts | 50 ++++++ > arch/arm/dts/imx6ul-isiot-nand.dts | 50 ++++++ > arch/arm/dts/imx6ul-isiot.dtsi | 142 +++++++++++++++ > board/engicam/geam6ul/MAINTAINERS | 1 + > board/engicam/icorem6/MAINTAINERS | 3 + > board/engicam/icorem6_rqs/MAINTAINERS | 3 + > board/engicam/isiotmx6ul/Kconfig | 12 ++ > board/engicam/isiotmx6ul/MAINTAINERS | 10 ++ > board/engicam/isiotmx6ul/Makefile | 6 + > board/engicam/isiotmx6ul/README | 28 +++ > board/engicam/isiotmx6ul/isiotmx6ul.c | 315 > ++++++++++++++++++++++++++++++++++ > configs/imx6ul_isiot_mmc_defconfig | 41 +++++ > configs/imx6ul_isiot_nand_defconfig | 42 +++++ > include/configs/imx6qdl_icore.h | 2 +- > include/configs/imx6ul_geam.h | 2 +- > include/configs/imx6ul_isiot.h | 205 ++++++++++++++++++++++ > 18 files changed, 925 insertions(+), 3 deletions(-) > create mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts > create mode 100644 arch/arm/dts/imx6ul-isiot-nand.dts > create mode 100644 arch/arm/dts/imx6ul-isiot.dtsi > create mode 100644 board/engicam/isiotmx6ul/Kconfig > create mode 100644 board/engicam/isiotmx6ul/MAINTAINERS > create mode 100644 board/engicam/isiotmx6ul/Makefile > create mode 100644 board/engicam/isiotmx6ul/README > create mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c > create mode 100644 configs/imx6ul_isiot_mmc_defconfig > create mode 100644 configs/imx6ul_isiot_nand_defconfig > create mode 100644 include/configs/imx6ul_isiot.h >
Applied to u-boot-imx, thanks ! Best regards, Stefano -- Meet DENX at the Embedded World Trade Show 14 Mar - 16 Mar 2017, Nuremberg Trade Fair Centre, Hall 4, Booth 581 -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
