Hi,

On 03/03/17 09:22, Maxime Ripard wrote:
> On Thu, Mar 02, 2017 at 12:03:20AM +0800, Icenowy Zheng wrote:
>>
>> 2017年3月1日 23:51于 Maxime Ripard <[email protected]>写道:
>>>
>>> Hi Andre, 
>>>
>>> On Wed, Mar 01, 2017 at 02:25:26AM +0000, Andre Przywara wrote: 
>>>> The Pine64 (and all other 64-bit Allwinner boards) need to load an 
>>>> ARM Trusted Firmware image beside the actual U-Boot proper. 
>>>> This can now be easily achieved by using the just extended SPL FIT 
>>>> loading support, so enable it in the Pine64 defconfig. 
>>>> Also add the FIT image as a build target to 64-bit sunxi board to 
>>>> trigger the respective Makefile rules. 
>>>>
>>>> Signed-off-by: Andre Przywara <[email protected]> 
>>>> --- 
>>>>   configs/pine64_plus_defconfig  | 6 ++++++ 
>>>>   include/configs/sunxi-common.h | 4 ++++ 
>>>>   2 files changed, 10 insertions(+) 
>>>>
>>>> diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig 
>>>> index 7c7d86f..2b47157 100644 
>>>> --- a/configs/pine64_plus_defconfig 
>>>> +++ b/configs/pine64_plus_defconfig 
>>>> @@ -3,9 +3,14 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y 
>>>>   CONFIG_ARCH_SUNXI=y 
>>>>   CONFIG_MACH_SUN50I=y 
>>>>   CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" 
>>>> +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" 
>>>>   # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set 
>>>>   CONFIG_CONSOLE_MUX=y 
>>>>   CONFIG_SPL=y 
>>>> +CONFIG_FIT=y 
>>>> +CONFIG_SPL_FIT=y 
>>>> +CONFIG_SPL_LOAD_FIT=y 
>>>> +CONFIG_SPL_OF_LIBFDT=y 
>>>
>>> I'm not sure we want to force down that support to all our users. 
>>
>> A64 boards are now unusable without proper ATF.
> 
> That's debatable, but that's not really what I meant. What I meant was
> that they're perfectly usable without FIT.

But this is a defconfig for a certain, and the Pine64 is not really
usable without ATF at the moment in an upstream tree.

Do you want a CONFIG_LOAD_ATF wrapper option, that would make it easier
to select / deselect?

Cheers,
Andre.
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/listinfo/u-boot

Reply via email to