On Sun, Mar 5, 2017 at 8:36 AM, Nathan Rossi <[email protected]> wrote: > When the zynq_gem driver initializes the phy it sets the supported > features that the phy can support and advertise. However instead of > masking the supported features such that it limits the available > features it sets the phy to have the exact supported features of the > zynq_gem. This is problematic as it will enable features that a phy does > not have or cannot advertise. > > Specifically this appears as an issue when using a phy that is only > capable of 10/100, but the zynq_gem driver will override this and try to > enable and advertise 10/100/1000. > > Reported-by: Arno Steffens <[email protected]> > Fixes: 80243528ef ("net: gem: Fix gem driver on 1Gbps LAN") > Signed-off-by: Nathan Rossi <[email protected]> > Tested-by: Arno Steffens <[email protected]> > Cc: Joe Hershberger <[email protected]> > Cc: Michal Simek <[email protected]>
Acked-by: Joe Hershberger <[email protected]> _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
