Enable PPA on LS2080A, LS2088A boards: -LS2080ARDB, LS2080AQDS -LS2088ARDB, LS2088AQDS
Signed-off-by: Santan Kumar <[email protected]> Signed-off-by: Abhimanyu Saini <[email protected]> Signed-off-by: Priyanka Jain <[email protected]> --- Changes for v2: Changed the subject Made changes based on latest ppa config arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 + board/freescale/ls2080aqds/ls2080aqds.c | 8 ++++++++ board/freescale/ls2080ardb/ls2080ardb.c | 7 +++++++ configs/ls2080aqds_defconfig | 1 + configs/ls2080ardb_defconfig | 1 + 5 files changed, 18 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index adccdf1..bbbe2de 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -136,6 +136,7 @@ config SYS_LS_PPA_FW_ADDR hex "Address of PPA firmware loading from" depends on FSL_LS_PPA default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT + default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A default 0x60500000 if SYS_LS_PPA_FW_IN_XIP help If the PPA firmware locate at XIP flash, such as NOR or diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index 73a61fd..894dc74 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -19,6 +19,10 @@ #include <asm/arch/soc.h> #include <hwconfig.h> #include <fsl_sec.h> +#ifdef CONFIG_FSL_LS_PPA +#include <asm/arch/ppa.h> +#endif + #include "../common/qixis.h" #include "ls2080aqds_qixis.h" @@ -224,6 +228,10 @@ int board_init(void) select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); rtc_enable_32khz_output(); +#ifdef CONFIG_FSL_LS_PPA + ppa_init(); +#endif + return 0; } diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 02954ef..917f214 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -19,6 +19,9 @@ #include <i2c.h> #include <asm/arch/soc.h> #include <fsl_sec.h> +#ifdef CONFIG_FSL_LS_PPA +#include <asm/arch/ppa.h> +#endif #include "../common/qixis.h" #include "ls2080ardb_qixis.h" @@ -180,6 +183,10 @@ int board_init(void) QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); +#ifdef CONFIG_FSL_LS_PPA + ppa_init(); +#endif + #ifdef CONFIG_FSL_MC_ENET /* invert AQR405 IRQ pins polarity */ out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK); diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index c889845..5a6b20d 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS2080AQDS=y +CONFIG_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index 2efb313..daa90ae 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS2080ARDB=y +CONFIG_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
