Dear =?utf-8?B?546L5Z+55YW7ICA=?=, In message <[email protected]> you wrote: > > i porting u-boot-1.3.4 to s3c44box.when i porting uclinux to board, > then there is the problem as follows: > > END-class command failed. > Packets sent: 1301 > Retransmissions: 11 > Timeouts: 0 > Damaged packets: 0 > Fatal Kermit Protocol Error: Too many retries > HINTS... If the preceding error message does not explain the failure: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Try changing the remote Kermit's FLOW-CONTROL setting. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > Try it again with SET STREAMING OFF. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > Try it again with SET PARITY SPACE. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > As a last resort, give a ROBUST command and try again. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^] > Pls help me. Well, did you read what kermit printed out for you? And did you follow the hints? Or did you read the manual, say section "4.3. Configuring the "kermit" command" at http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. ? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] "No proper program contains an indication which as an operator- applied occurrence identifies an operator-defining occurrence which as an indication-applied occurrence identifies an indication-defining occurrence different from the one identified by the given indication as an indication-applied occurrence." - ALGOL 68 Report _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
