The number of pins to be configured could be more than 50 e.g. in case of sdram controller, there are about 56 pins (32 data lines, 12 address & some control signals).
Signed-off-by: Vikas Manocha <[email protected]> cc: Christophe KERELLO <[email protected]> --- drivers/pinctrl/pinctrl_stm32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index 3d2ab53..9626204 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -5,6 +5,7 @@ #include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; +#define MAX_PINS_ONE_IP 70 static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin) { @@ -60,7 +61,7 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node) static int stm32_pinctrl_set_state_simple(struct udevice *dev, struct udevice *periph) { - u32 pin_mux[50]; + u32 pin_mux[MAX_PINS_ONE_IP]; struct fdtdec_phandle_args args; int rv, len; -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
