On 03/22/2017 10:45 AM, Ley Foon Tan wrote: > On Fri, Mar 10, 2017 at 9:53 AM, Marek Vasut <[email protected]> wrote: >> On 03/09/2017 01:26 AM, Ley Foon Tan wrote: >>> Convert Altera ddr driver to use Kconfig method. Enable ALTERA_SDRAM >>> by default if it is on Gen5 target. Arria 10 will have different driver. >>> >>> Signed-off-by: Tien Fong Chee <[email protected]> >>> Signed-off-by: Ley Foon Tan <[email protected]> >>> --- >>> drivers/Kconfig | 2 ++ >>> drivers/ddr/Kconfig | 1 + >>> drivers/ddr/altera/Kconfig | 6 ++++++ >>> include/configs/socfpga_common.h | 5 ----- >>> 4 files changed, 9 insertions(+), 5 deletions(-) >>> create mode 100644 drivers/ddr/Kconfig >>> create mode 100644 drivers/ddr/altera/Kconfig >>> >>> diff --git a/drivers/Kconfig b/drivers/Kconfig >>> index 0e5d97d..3e6bbac 100644 >>> --- a/drivers/Kconfig >>> +++ b/drivers/Kconfig >>> @@ -14,6 +14,8 @@ source "drivers/cpu/Kconfig" >>> >>> source "drivers/crypto/Kconfig" >>> >>> +source "drivers/ddr/Kconfig" >>> + >>> source "drivers/demo/Kconfig" >>> >>> source "drivers/ddr/fsl/Kconfig" >>> diff --git a/drivers/ddr/Kconfig b/drivers/ddr/Kconfig >>> new file mode 100644 >>> index 0000000..b764add >>> --- /dev/null >>> +++ b/drivers/ddr/Kconfig >>> @@ -0,0 +1 @@ >>> +source "drivers/ddr/altera/Kconfig" >>> diff --git a/drivers/ddr/altera/Kconfig b/drivers/ddr/altera/Kconfig >>> new file mode 100644 >>> index 0000000..9554da7 >>> --- /dev/null >>> +++ b/drivers/ddr/altera/Kconfig >>> @@ -0,0 +1,6 @@ >>> +config ALTERA_SDRAM >>> + bool "SoCFPGA SDRAM for Arria5/Cyclone5 devices" >> >> Does this controller even support SDRAM ? :) > The existing DDR driver is for Gen5 only. We will have new DDR driver > for Arria 10 in later patchset.
I was asking about the SDRAM support in Gen5 controller though :) -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
