[U-Boot] [PATCH v2 26/45] net: mvpp2: Add MDIO support for PPv2.2

[Stefan Roese]

In U-Boot the MDIO / SMI support is integrated in the mvpp2 driver,
currently only supporting the 32bit platforms (Armada 37x). This patch
now adds the A7k/8k PPv2.2 MDIO support to that the phy / mii IF
can be used as well on these platforms.

Signed-off-by: Stefan Roese <s...@denx.de>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>

---

Changes in v2:
- Added Acked-by from Joe

 drivers/net/mvpp2.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index 16da28de69..8751ee85e3 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -397,7 +397,9 @@ do {                                                        
                \
        (((index) < (q)->last_desc) ? ((index) + 1) : 0)
 
 /* SMI: 0xc0054 -> offset 0x54 to lms_base */
-#define MVPP2_SMI                              0x0054
+#define MVPP21_SMI                             0x0054
+/* PP2.2: SMI: 0x12a200 -> offset 0x1200 to iface_base */
+#define MVPP22_SMI                             0x1200
 #define     MVPP2_PHY_REG_MASK                 0x1f
 /* SMI register fields */
 #define     MVPP2_SMI_DATA_OFFS                        0       /* Data */
@@ -745,6 +747,7 @@ struct mvpp2 {
        void __iomem *base;
        void __iomem *lms_base;
        void __iomem *iface_base;
+       void __iomem *mdio_base;
 
        /* List of pointers to port structures */
        struct mvpp2_port **port_list;
@@ -4089,7 +4092,7 @@ static int smi_wait_ready(struct mvpp2 *priv)
        /* wait till the SMI is not busy */
        do {
                /* read smi register */
-               smi_reg = readl(priv->lms_base + MVPP2_SMI);
+               smi_reg = readl(priv->mdio_base);
                if (timeout-- == 0) {
                        printf("Error: SMI busy timeout\n");
                        return -EFAULT;
@@ -4131,14 +4134,14 @@ static int mpp2_mdio_read(struct mii_dev *bus, int 
addr, int devad, int reg)
                | MVPP2_SMI_OPCODE_READ;
 
        /* write the smi register */
-       writel(smi_reg, priv->lms_base + MVPP2_SMI);
+       writel(smi_reg, priv->mdio_base);
 
        /* wait till read value is ready */
        timeout = MVPP2_SMI_TIMEOUT;
 
        do {
                /* read smi register */
-               smi_reg = readl(priv->lms_base + MVPP2_SMI);
+               smi_reg = readl(priv->mdio_base);
                if (timeout-- == 0) {
                        printf("Err: SMI read ready timeout\n");
                        return -EFAULT;
@@ -4149,7 +4152,7 @@ static int mpp2_mdio_read(struct mii_dev *bus, int addr, 
int devad, int reg)
        for (timeout = 0; timeout < MVPP2_SMI_TIMEOUT; timeout++)
                ;
 
-       return readl(priv->lms_base + MVPP2_SMI) & MVPP2_SMI_DATA_MASK;
+       return readl(priv->mdio_base) & MVPP2_SMI_DATA_MASK;
 }
 
 /*
@@ -4186,7 +4189,7 @@ static int mpp2_mdio_write(struct mii_dev *bus, int addr, 
int devad, int reg,
        smi_reg &= ~MVPP2_SMI_OPCODE_READ;
 
        /* write the smi register */
-       writel(smi_reg, priv->lms_base + MVPP2_SMI);
+       writel(smi_reg, priv->mdio_base);
 
        return 0;
 }
@@ -4469,10 +4472,14 @@ static int mvpp2_base_probe(struct udevice *dev)
                priv->lms_base = (void *)dev_get_addr_index(dev, 1);
                if (IS_ERR(priv->lms_base))
                        return PTR_ERR(priv->lms_base);
+
+               priv->mdio_base = priv->lms_base + MVPP21_SMI;
        } else {
                priv->iface_base = (void *)dev_get_addr_index(dev, 1);
                if (IS_ERR(priv->iface_base))
                        return PTR_ERR(priv->iface_base);
+
+               priv->mdio_base = priv->iface_base + MVPP22_SMI;
        }
 
        if (priv->hw_version == MVPP21)
-- 
2.12.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot