Hello Lukasz,
Am 27.03.2017 um 10:04 schrieb Lukasz Majewski:
Dear All,
v4.9 Linux release:
SHA1: 69973b830859bc6529a7a0468ba0d80ee5117826
in the ./drivers/i2c/busses/i2c-omap.c
recommends to use SCLH=5 and SCLL=7 values.
This patch sets them to default.
Any comments on this?
I am fine with it, it is in my queue for sending a pull
request to Tom.
bye,
Heiko
Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
drivers/i2c/omap24xx_i2c.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h
index 3dae295..8a4ae98 100644
--- a/drivers/i2c/omap24xx_i2c.h
+++ b/drivers/i2c/omap24xx_i2c.h
@@ -121,17 +121,17 @@
* scll_trim = 7
* sclh_trim = 5
*
- * The linux 2.6.30 kernel uses
- * scll_trim = 6
- * sclh_trim = 6
+ * The linux 4.9 kernel uses
+ * scll_trim = 7
+ * sclh_trim = 5
*
* These are the trim values for standard and fast speed
*/
#ifndef I2C_FASTSPEED_SCLL_TRIM
-#define I2C_FASTSPEED_SCLL_TRIM 6
+#define I2C_FASTSPEED_SCLL_TRIM 7
#endif
#ifndef I2C_FASTSPEED_SCLH_TRIM
-#define I2C_FASTSPEED_SCLH_TRIM 6
+#define I2C_FASTSPEED_SCLH_TRIM 5
#endif
/* These are the trim values for high speed */
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot