From: Konstantin Porotchkin <[email protected]> This patch allows probing all PCIe nodes defined in DTS even if there no device connected to such node (no link). Without this fix the driver returns -ENODEV when the PCIe link is down. As result the pci_init function stops scanning bus on first empty PCIe slot and all devices located in higher numbered buses are not discovered.
Signed-off-by: Konstantin Porotchkin <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Igal Liberman <[email protected]> Cc: Nadav Haklai <[email protected]> --- drivers/pci/pcie_dw_mvebu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pcie_dw_mvebu.c b/drivers/pci/pcie_dw_mvebu.c index d4776a9..05a0660 100644 --- a/drivers/pci/pcie_dw_mvebu.c +++ b/drivers/pci/pcie_dw_mvebu.c @@ -487,13 +487,13 @@ static int pcie_dw_mvebu_probe(struct udevice *dev) /* Don't register host if link is down */ if (!pcie_dw_mvebu_pcie_link_up(pcie->ctrl_base, LINK_SPEED_GEN_3)) { printf("PCIE-%d: Link down\n", dev->seq); - return -ENODEV; + } else { + printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq, + pcie_dw_get_link_speed(pcie->ctrl_base), + pcie_dw_get_link_width(pcie->ctrl_base), + hose->first_busno); } - printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev->seq, - pcie_dw_get_link_speed(pcie->ctrl_base), - pcie_dw_get_link_width(pcie->ctrl_base), hose->first_busno); - pcie_dw_regions_setup(pcie); /* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */ -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
