Hi Peng, On Thu, Mar 2, 2017 at 6:21 AM, Peng Fan <[email protected]> wrote: > > >> -----Original Message----- >> From: Jagan Teki [mailto:[email protected]] >> Sent: Wednesday, March 01, 2017 10:12 PM >> To: Peng Fan <[email protected]> >> Cc: Jagan Teki <[email protected]>; [email protected] >> Subject: Re: [U-Boot] i.MX6QP sd boot issue >> >> On Wed, Mar 1, 2017 at 6:28 PM, Peng Fan <[email protected]> wrote: >> > Hi Jagan, >> > >> > Did you put J3 to connect 1-2? >> >> What is J3, I couldn't find it. I saw J1 PCIe connector and J2 Headphone >> Jack. >> Can you point me J3. > > There is J2 and J3 beside the boot mode switch s2. > I only have a base board. So J2 needs to be 1-2 connected. J3 1-2 connected > to not boot from SPI. > > You could have a try. > If your board runs into serial download mode, then J3 maybe wrong connection. > If your board does not run into serial download mode, J2 maybe wrong > connection.
I still not able to boot from SD with mx6qpsabreauto_defconfig, did you able to boot from SD? thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
