Signed-off-by: Priyanka Jain <priyanka.j...@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gu...@nxp.com>
---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 +
arch/arm/dts/fsl-ls2080a-rdb.dts | 22 +++++++++++
board/freescale/ls2080ardb/ls2080ardb.c | 23 +++++++++++-
configs/ls2088ardb_qspi_defconfig | 41 ++++++++++++++++++++
include/configs/ls2080a_common.h | 13 ++++++
include/configs/ls2080aqds.h | 14 +------
include/configs/ls2080ardb.h | 58 ++++++++++++++++++++++++++++-
7 files changed, 157 insertions(+), 15 deletions(-)
create mode 100644 configs/ls2088ardb_qspi_defconfig
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index b24462b..9bff57f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -160,6 +160,7 @@ endchoice
config SYS_LS_PPA_FW_ADDR
hex "Address of PPA firmware loading from"
depends on FSL_LS_PPA
+ default 0x20a00000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
diff --git a/arch/arm/dts/fsl-ls2080a-rdb.dts b/arch/arm/dts/fsl-ls2080a-rdb.dts
index 1a1813b..96dfafd 100644
--- a/arch/arm/dts/fsl-ls2080a-rdb.dts
+++ b/arch/arm/dts/fsl-ls2080a-rdb.dts
@@ -15,6 +15,7 @@
compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
aliases {
+ spi0 = &qspi;
spi1 = &dspi;
};
};
@@ -33,3 +34,24 @@
reg = <0>;
};
};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+};
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c
b/board/freescale/ls2080ardb/ls2080ardb.c
index ea05ec6..ae0f44f 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -57,12 +57,22 @@ unsigned long long get_qixis_addr(void)
int checkboard(void)
{
+#ifndef CONFIG_FSL_QSPI
u8 sw;
+#endif
char buf[15];
cpu_name(buf);
printf("Board: %s-RDB, ", buf);
+/*
+ * If QSPI is enabled, CPLD needs to be accessed via I2C,
+ * but LS2080A/LS2088ARDB boards has limitation that it does
+ * not support CPLD access via I2C
+ */
+#ifdef CONFIG_FSL_QSPI
+ printf("boot from QSPI\n");
+#else
sw = QIXIS_READ(arch);
printf("Board Arch: V%d, ", sw >> 4);
printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
@@ -74,11 +84,13 @@ int checkboard(void)
printf("vBank: %d\n", sw);
else if (sw == 0x9)
puts("NAND\n");
+ else if (sw == 0xf)
+ puts("QSPI\n");
else
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
-
+#endif
puts("SERDES1 Reference : ");
printf("Clock1 = 156.25MHz ");
printf("Clock2 = 156.25MHz");
@@ -199,6 +211,9 @@ int board_init(void)
int board_early_init_f(void)
{
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+ i2c_early_init_f();
+#endif
fsl_lsch3_early_init_f();
return 0;
}
@@ -321,6 +336,11 @@ void update_spd_address(unsigned int ctrl_num,
unsigned int slot,
unsigned int *addr)
{
+/*
+ * Only Board Rev F supports QSPI_BOOT
+ * so, no need to check for RevC or lower for QSPI_BOOT
+ */
+#ifndef CONFIG_QSPI_BOOT
u8 sw;
sw = QIXIS_READ(arch);
@@ -330,4 +350,5 @@ void update_spd_address(unsigned int ctrl_num,
else if (ctrl_num == 1 && slot == 1)
*addr = SPD_EEPROM_ADDRESS3;
}
+#endif
}
diff --git a/configs/ls2088ardb_qspi_defconfig
b/configs/ls2088ardb_qspi_defconfig
new file mode 100644
index 0000000..eae843a
--- /dev/null
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -0,0 +1,41 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS2080ARDB=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="LS2080A"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 427f623..969dd89 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -19,6 +19,13 @@
/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE +
0xfff0)
+#ifdef CONFIG_FSL_QSPI
+#undef CONFIG_CMD_IMLS
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+#endif
+
/* We need architecture specific misc initializations */
/* Link Definitions */
@@ -28,6 +35,12 @@
#else
#define CONFIG_SYS_TEXT_BASE 0x30100000
#endif
+#else
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
#endif
#define CONFIG_SUPPORT_RAW_INITRD
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index beacb99..5e23d1a 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -14,12 +14,6 @@ unsigned long get_board_sys_clk(void);
unsigned long get_board_ddr_clk(void);
#endif
-#ifdef CONFIG_FSL_QSPI
-#undef CONFIG_CMD_IMLS
-#define CONFIG_QIXIS_I2C_ACCESS
-#define CONFIG_SYS_I2C_EARLY_INIT
-#define CONFIG_SYS_I2C_IFDR_DIV 0x7e
-#endif
#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
@@ -262,13 +256,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
-#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_TEXT_BASE 0x20010000
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
-#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#else
+#ifndef CONFIG_QSPI_BOOT
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE +
0x200000)
#define CONFIG_ENV_SECT_SIZE 0x20000
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2155a89..728c143 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -32,7 +32,11 @@
unsigned long get_board_sys_clk(void);
#endif
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SYS_CLK_FREQ 100000000
+#else
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
+#endif
#define CONFIG_DDR_CLK_FREQ 133333333
#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4)
@@ -116,7 +120,9 @@ unsigned long get_board_sys_clk(void);
CONFIG_SYS_FLASH_BASE + 0x40000000}
#endif
+#ifndef CONFIG_FSL_QSPI
#define CONFIG_NAND_FSL_IFC
+#endif
#define CONFIG_SYS_NAND_MAX_ECCPOS 256
#define CONFIG_SYS_NAND_MAX_OOBFREE 2
@@ -154,7 +160,9 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
+#ifndef CONFIG_FSL_QSPI
#define CONFIG_CMD_NAND
+#endif
#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
@@ -165,12 +173,14 @@ unsigned long get_board_sys_clk(void);
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x04
#define QIXIS_LBMAP_NAND 0x09
+#define QIXIS_LBMAP_QSPI 0x0f
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RST_CTL_RESET_EN 0x30
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
#define QIXIS_RCW_SRC_NAND 0x119
+#define QIXIS_RCW_SRC_QSPI 0x62
#define QIXIS_RST_FORCE_MEM 0x01
#define CONFIG_SYS_CSPR3_EXT (0x0)
@@ -241,11 +251,13 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#ifndef CONFIG_QSPI_BOOT
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE +
0x200000)
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x2000
#endif
+#endif
/* Debug Server firmware */
#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
@@ -256,6 +268,7 @@ unsigned long get_board_sys_clk(void);
/*
* I2C
*/
+#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
#define I2C_MUX_PCA_ADDR 0x75
#define I2C_MUX_PCA_ADDR_PRI 0x75 /* Primary Mux*/
@@ -263,11 +276,18 @@ unsigned long get_board_sys_clk(void);
#define I2C_MUX_CH_DEFAULT 0x8
/* SPI */
-#ifdef CONFIG_FSL_DSPI
+#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_BAR
+#ifdef CONFIG_FSL_DSPI
#define CONFIG_SPI_FLASH_STMICRO
#endif
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE (1 << 26) /* 64MB */
+#define FSL_QSPI_FLASH_NUM 2
+#endif
+#endif
/*
* RTC configuration
@@ -347,6 +367,29 @@ unsigned long get_board_sys_clk(void);
" 0x580800000 \0" \
BOOTENV
#else
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "scriptaddr=0x80800000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "pxefile_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x88000000\0" \
+ "ramdisk_addr_r=0x89000000\0" \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x21100000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ "mcmemsize=0x40000000\0" \
+ "fdtfile=fsl-ls2080a-rdb.dtb\0" \
+ "mcinitcmd=fsl_mc start mc 0x20300000" \
+ " 0x20800000 \0" \
+ BOOTENV
+#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"scriptaddr=0x80800000\0" \
@@ -369,6 +412,7 @@ unsigned long get_board_sys_clk(void);
" 0x580800000 \0" \
BOOTENV
#endif
+#endif
#undef CONFIG_BOOTARGS
@@ -378,11 +422,19 @@ unsigned long get_board_sys_clk(void);
" hugepagesz=2m hugepages=256"
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_QSPI_BOOT
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20700000" \
+ " && cp.b $kernel_start $kernel_load $kernel_size" \
+ " && bootm $kernel_load" \
+ " || run distro_bootcmd"
+#else
/* Try to boot an on-NOR kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000"
\
" && cp.b $kernel_start $kernel_load $kernel_size" \
" && bootm $kernel_load" \
" || run distro_bootcmd"
+#endif
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
@@ -391,7 +443,11 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_PHY_CORTINA
#define CONFIG_PHYLIB
#define CONFIG_SYS_CORTINA_FW_IN_NOR
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_CORTINA_FW_ADDR 0x20900000
+#else
#define CONFIG_CORTINA_FW_ADDR 0x581000000
+#endif
#define CONFIG_CORTINA_FW_LENGTH 0x40000
#define CORTINA_PHY_ADDR1 0x10
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
