Hi Breno, On Fri, Apr 7, 2017 at 4:22 PM, Breno Lima <breno.l...@nxp.com> wrote: > Explain how to flash the eMMC and how to boot from it. > > Signed-off-by: Breno Lima <breno.l...@nxp.com> > --- > board/freescale/mx6sabresd/README | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/board/freescale/mx6sabresd/README > b/board/freescale/mx6sabresd/README > index 5814b9d..875d4b2 100644 > --- a/board/freescale/mx6sabresd/README > +++ b/board/freescale/mx6sabresd/README > @@ -27,6 +27,28 @@ This will generate the image called u-boot.imx. > > $ sudo dd if=u-boot.imx of=/dev/sdb bs=1K seek=1 && sync > > +- Flash the u-boot.imx binary into the eMMC:
I would put a extra section for booting from eMMC. Something like: Change: 1. Booting via Normal U-Boot to 1. Booting from SD card via normal U-Boot and then: 2. Booting from eMMC via normal U-Boot The rest looks good. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot