From: Jagan Teki <ja...@amarulasolutions.com>
Since SabreSD is supporting fdt, there is no use
of printing the board name explicitly using checkboard
because dtb supported u-boot will print model like this
Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board
Cc: Stefano Babic <sba...@denx.de>
Cc: Fabio Estevam <fabio.este...@nxp.com>
Cc: Michael Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Changes for v4, v3, v2:
- none
board/freescale/imx6sabresd/imx6sabresd.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/board/freescale/imx6sabresd/imx6sabresd.c
b/board/freescale/imx6sabresd/imx6sabresd.c
index 595e1db..3c00ea6 100644
--- a/board/freescale/imx6sabresd/imx6sabresd.c
+++ b/board/freescale/imx6sabresd/imx6sabresd.c
@@ -449,12 +449,6 @@ int board_late_init(void)
return 0;
}
-int checkboard(void)
-{
- puts("Board: MX6-SabreSD\n");
- return 0;
-}
-
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
#include <libfdt.h>
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
