On 7 April 2017 at 04:38, Heiko Stuebner <[email protected]> wrote: > The warm-reset of rk3188 socs keeps the remap setting as it was, so if > it was enabled, the cpu would start from address 0x0 of the sram instead > of address 0x0 of the bootrom, thus making the reset hang. > > Therefore make sure the remap is disabled before attempting a warm reset. > > Cold reset is not affected by this at all. > > Signed-off-by: Heiko Stuebner <[email protected]> > --- > drivers/sysreset/sysreset_rk3188.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+)
Acked-by: Simon Glass <[email protected]> _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
