From: Suniel Mahesh <suniel.spar...@gmail.com> Driver model for OMAP24XX and later Multichannel SPI master controller, if used, OMAP3 SPI configuration is set. The same configuration is defined in ti_armv7_omap.h, because of redefinition, warnings are spilled during build.
Fixed warnings for AM335x SOC by using #ifndef directive in ti_armv7_omap.h. Signed-off-by: Suniel Mahesh <suniel.spar...@gmail.com> --- Note: Tested on Beaglebone Black using latest u-boot mainline tree with device tree set --- include/configs/ti_armv7_omap.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h index de14b85..3167b61 100644 --- a/include/configs/ti_armv7_omap.h +++ b/include/configs/ti_armv7_omap.h @@ -21,7 +21,9 @@ #define CONFIG_SYS_I2C_OMAP24XX /* SPI IP Block */ +#ifndef CONFIG_OMAP3_SPI #define CONFIG_OMAP3_SPI +#endif /* GPIO block */ #define CONFIG_OMAP_GPIO -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot